1
Replacement parts
Bambu Lab A1 purge waste bin
This is not a fixed STL. SpeakCAD generates the bambu lab a1 purge waste bin to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a purge waste bin for a Bambu A1, 150×110×90 mm, 60×40 mm angled inlet at one top corner, 2 mm walls, rounded inside corners.
What a bambu lab a1 purge waste bin is
A catch bin for the purge chute of a full-size A1 (385 × 410 × 458 mm), so AMS lite colour changes land in a 1.2 litre box instead of on the desk. The bin is 150 × 110 × 90 mm with a 60 × 40 mm angled inlet that lines up under the chute at the rear left, 2 mm walls and a rounded inside corner so the poop tips out easily. Print in PLA or PETG, open side up.
The A1 mini chute is in a different place, so its bin does not line up on the A1. Open the ready-made bin in SpeakCAD for free, move the inlet or change the volume in the viewer or the chat, then download the STL.
People also search
bambu a1 poop chute stla1 purge binbambu a1 waste bin 3d printa1 ams lite poop bucket
Questions people ask about a bambu lab a1 purge waste bin
A catch bin for the purge chute of a full-size A1 (385 × 410 × 458 mm), so AMS lite colour changes land in a 1.2 litre box instead of on the desk. The bin is 150 × 110 × 90 mm with a 60 × 40 mm angled inlet that lines up under the chute at the rear left, 2 mm walls and a rounded inside corner so the poop tips out easily. Print in PLA or PETG, open side up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a purge waste bin for a Bambu A1, 150×110×90 mm, 60×40 mm angled inlet at one top corner, 2 mm walls, rounded inside corners.
The A1 mini chute is in a different place, so its bin does not line up on the A1. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Voron 2.4 rear spool holder for 2020 frameA rear spool holder that bolts to the 2020 frame of a Voron 2.4 with two M5 T-nuts 20 mm apart and carries a 1 kg spool on two 608 bearings (22 × 8 × 7 mm).Hotpoint washing machine programme knobA replacement programme knob for Hotpoint and Indesit washing machines, about 50 mm across and 22 mm deep.Sofa leg replacement foot, M8 studA missing sofa foot leaves the frame tilted and scratches the floor.Creality Ender 3 V3 bed leveling knob replacementA replacement thumbwheel for the bed leveling screws on a Creality Ender 3 V3 SE and KE, Ender 3 V2 and Neo, which use M4 screws with a knurled 34 mm plastic…Osprey Talon sternum-magnet clipA replacement magnet clip for an Osprey Talon / Tempest sternum strap, 20 × 12 mm with a 2 mm webbing slot.IKEA POÄNG ottoman felt glidesGlides that replace worn POÄNG ottoman feet (about 28 × 18 mm) so the stool slides without scratching.