1
Replacement parts
Bambu Lab A1 mini riser feet
This is not a fixed STL. SpeakCAD generates the bambu lab a1 mini riser feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model four riser feet for a Bambu A1 mini, 40 mm round pads, 25 mm tall, 26 mm pocket 6 mm deep for the rubber foot, flat base.
What a bambu lab a1 mini riser feet is
Four riser feet that lift an A1 mini (347 × 315 × 365 mm) by 25 mm for better airflow under the base and easier access to the power switch and USB-C. Each foot is a 40 mm round pad with a 26 mm pocket, 6 mm deep, for the stock rubber foot, and a flat base for an optional 3 mm self-adhesive rubber pad. Print in PETG, or TPU at 95A for extra damping, pocket up.
The full-size A1 is heavier and wider, so these feet are too small to be stable under it. Open the ready-made model in SpeakCAD for free, change the height or the pocket diameter in the viewer or the chat, then download the STL.
People also search
a1 mini riser feet stlbambu a1 mini feeta1 mini anti vibration feeta1 mini raise printer 3d print
Questions people ask about a bambu lab a1 mini riser feet
Four riser feet that lift an A1 mini (347 × 315 × 365 mm) by 25 mm for better airflow under the base and easier access to the power switch and USB-C. Each foot is a 40 mm round pad with a 26 mm pocket, 6 mm deep, for the stock rubber foot, and a flat base for an optional 3 mm self-adhesive rubber pad. Print in PETG, or TPU at 95A for extra damping, pocket up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model four riser feet for a Bambu A1 mini, 40 mm round pads, 25 mm tall, 26 mm pocket 6 mm deep for the rubber foot, flat base.
The full-size A1 is heavier and wider, so these feet are too small to be stable under it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA SMÅSTAD bin-lid soft bumpA bump that sits under a SMÅSTAD bench-bin lid so it does not slam on little fingers.Sovol SV06 filament guide with 608 bearingA filament guide for the top of a Sovol SV06 that routes filament from the spool holder to the extruder over a 608 bearing (22 × 8 × 7 mm) so it no longer ru…Samsung washing machine softener siphon capA replacement siphon cap for the fabric softener compartment of Samsung front-loader detergent drawers, the small cap that goes missing and makes softener po…Bosch Purion display rain coverA snap-on cover for a Bosch Purion e-bike display that keeps rain and parking-lot knocks off the screen and buttons.CamelBak bite valve dust cover cap replacementThe hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit.Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.