Tools & jigs

Assembly square for 40 series aluminium profile

An assembly square that holds two 40 series aluminium profiles at 90 degrees while you tighten the joint, the fiddly part of building a sim rig alone. It is a flat L-shaped plate with 120 mm legs, and a 7.8 mm rib under each leg sits in the 8 mm slot, so both profiles are lined up by their slots; one M8 bolt per leg clamps it for the moment. The plate is 6 mm thick with a web across the corner. Print it ribs up, without supports, and check it once against a real square. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design an assembly square that holds two 40 series aluminium profiles (8 mm slot) at 90 degrees while their joint is tightened. Flat L-shaped plate 6 mm thick: two legs at a right angle, each 120 mm long from the outer corner and 40 mm wide, with a triangular web filling the inside corner 40 mm along each leg. Under each leg a locating rib 7.8 mm wide and 2 mm tall on the leg centreline, starting 50 mm from the outer corner and running to the leg end. One 8.4 mm hole per leg on the centreline, 95 mm from the outer corner, for an M8 bolt into a T-nut. Print ribs up, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

A square for 20 series profile has 6 mm ribs on 20 mm legs and is useless on a 40 series frame. Longer legs hold a tall upright better, and a 4080 beam wants two ribs 40 mm apart. Describe your profile and leg length to SpeakCAD and the ribs and holes are placed for it.

Also searched as: 4040 profile assembly square stl, aluminium extrusion squaring jig 3d print, sim rig build alignment jig, t-slot 90 degree assembly jig.

Questions people ask about an assembly square for 40 series aluminium profile

An assembly square that holds two 40 series aluminium profiles at 90 degrees while you tighten the joint, the fiddly part of building a sim rig alone. It is a flat L-shaped plate with 120 mm legs, and a 7.8 mm rib under each leg sits in the 8 mm slot, so both profiles are lined up by their slots; one M8 bolt per leg clamps it for the moment. The plate is 6 mm thick with a web across the corner. Print it ribs up, without supports, and check it once against a real square.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your assembly square for 40 series aluminium profile

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the tools & jigs on the marketplace, where makers share their models, most of them free.