1
Enclosures & cases
Arduino Nano Every case
This is not a fixed STL. SpeakCAD generates the arduino nano every case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an Arduino Nano Every case, 18.8×45.8×12 mm cavity, 8×3.5 mm micro-USB slot, 2 mm reset hole, two 2.6×38 mm header slots.
What a arduino nano every case is
A snap case for an Arduino Nano Every (18 × 45 mm). The cavity is 18.8 × 45.8 × 12 mm with an 8 × 3.5 mm micro-USB opening, a 2 mm reset hole and two 2.6 × 38 mm slots on top so jumper wires still reach the headers. Walls are 1.6 mm with a friction lid. Print upside down in PLA.
The Nano ESP32 and Nano 33 IoT have the same outline but a USB-C or different chip height, so check the connector before printing. Open the ready-made model in SpeakCAD for free, change the openings in the viewer or the chat, then download the STL.
People also search
arduino nano every case stlnano every enclosure 3d printarduino nano every boxnano every case 3d model
Questions people ask about a arduino nano every case
A snap case for an Arduino Nano Every (18 × 45 mm). The cavity is 18.8 × 45.8 × 12 mm with an 8 × 3.5 mm micro-USB opening, a 2 mm reset hole and two 2.6 × 38 mm slots on top so jumper wires still reach the headers. Walls are 1.6 mm with a friction lid. Print upside down in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an Arduino Nano Every case, 18.8×45.8×12 mm cavity, 8×3.5 mm micro-USB slot, 2 mm reset hole, two 2.6×38 mm header slots.
The Nano ESP32 and Nano 33 IoT have the same outline but a USB-C or different chip height, so check the connector before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
BME680 air quality sensor housingA louvred housing for a BME680 breakout (about 25 × 18 mm on Adafruit-style boards) that keeps the gas sensor away from the microcontroller so VOC and temper…Safety cover for an open-frame 12 V power supplyA vented cover that fits over an open-frame 12 V 5 A switching power supply so the mains terminals are no longer exposed on a bench or inside a project.Raspberry Pi 5 case with active cooler cutoutA two-part snap-fit case sized for the Raspberry Pi 5, whose board measures 85 x 56 mm with M2.5 mounting holes on a 58 x 49 mm pattern.Apple Watch Series 11 travel charger caseA two-part clamshell that holds an Apple Watch Series 11 (about 46 mm case) on its magnetic charger plus a 1 m USB-C cable coiled in a 70 mm spiral.Raspberry Pi Pico 2 W caseA slim case for a Raspberry Pi Pico 2 W (21 × 51 mm) with or without soldered headers.Waveshare 7.5 inch e-paper photo frameA photo frame for the Waveshare 7.5 inch e-Paper panel (170.2 × 111.2 mm, 163.2 × 97.9 mm active area).