1
Brackets & mounts
Apple HomePod mini wall shelf
This is not a fixed STL. SpeakCAD generates the apple homepod mini wall shelf to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a HomePod mini wall shelf, 70 mm seat ring with 3 mm lip, 110 mm deep arm, 6 mm rear cable slot, two 4 mm holes, 2.4 mm PLA.
What a apple homepod mini wall shelf is
A wall shelf for a HomePod mini (97.9 mm across, 84.3 mm tall), which also acts as a Thread border router for Matter devices. The seat is a 70 mm ring with a 3 mm lip so the round base cannot roll, a 6 mm slot at the back guides the woven cable down the wall, and the arm is 110 mm deep with two 4 mm holes. Print in PLA, 2.4 mm walls.
The full-size HomePod is 142 mm wide and needs a much bigger shelf. Open the ready-made shelf in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
homepod mini wall mount stlhomepod mini shelf 3d printhomepod mini holderhomepod mini bracket 3d model
Questions people ask about a apple homepod mini wall shelf
A wall shelf for a HomePod mini (97.9 mm across, 84.3 mm tall), which also acts as a Thread border router for Matter devices. The seat is a 70 mm ring with a 3 mm lip so the round base cannot roll, a 6 mm slot at the back guides the woven cable down the wall, and the arm is 110 mm deep with two 4 mm holes. Print in PLA, 2.4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a HomePod mini wall shelf, 70 mm seat ring with 3 mm lip, 110 mm deep arm, 6 mm rear cable slot, two 4 mm holes, 2.4 mm PLA.
The full-size HomePod is 142 mm wide and needs a much bigger shelf. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Studio Display iPhone Continuity Camera mountA MagSafe clip that hangs an iPhone 16 or 17 on the top bezel of a Studio Display for Continuity Camera, 8–14 mm bezel clamp and a 56 mm MagSafe disc.Festool CT MIDI hose wall hookA hook that parks a CT MIDI 27 mm hose in a 80 mm loop so it is not a trip on the floor.Fiber ONT adjustable wall bracketA wall bracket for a fiber ONT that holds the box on edge above the fiber outlet so the patch lead does not bend tighter than its 30 mm minimum radius.iPad 10th gen treadmill console holder clipA cradle that hooks over the top lip of a treadmill or exercise bike console and holds an iPad 10th generation (248.6 x 179.5 x 7 mm) in landscape at a 15 de…Ring Video Doorbell 30 degree wedge mountAn angled spacer that turns a Ring Video Doorbell 2nd gen towards the path when the door sits in a recess.Valve Index headset and controller wall mountA combined wall station for the Valve Index headset and its two Knuckles controllers.