1
Everyday fixes
10 inch rack 2U fan panel for 80 mm fans
This is not a fixed STL. SpeakCAD generates the 10 inch rack 2u fan panel for 80 mm fans to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a 10 inch 2U fan panel 254×88.9 mm, two 76 mm openings with 4.3 mm holes at 71.5 mm, hex grille, 6.5 mm slots at 236.5 mm, PETG.
What a 10 inch rack 2u fan panel for 80 mm fans is
A 2U panel that holds two 80 mm fans in a 10 inch rack to pull heat off mini PCs and switches. The face is 254 × 88.9 mm with 6.5 mm slots at 236.5 mm centres, each fan opening is 76 mm with four 4.3 mm holes on the 71.5 mm pattern, and a hex grille guards the blades. Print in PETG, 3 mm thick.
A 120 mm fan needs 3U. Open the ready-made panel in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
10 inch rack fan panel stlmini rack 80mm fan 3d print10 inch 2u fan mountrack fan panel 3d model
Questions people ask about a 10 inch rack 2u fan panel for 80 mm fans
A 2U panel that holds two 80 mm fans in a 10 inch rack to pull heat off mini PCs and switches. The face is 254 × 88.9 mm with 6.5 mm slots at 236.5 mm centres, each fan opening is 76 mm with four 4.3 mm holes on the 71.5 mm pattern, and a hex grille guards the blades. Print in PETG, 3 mm thick.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a 10 inch 2U fan panel 254×88.9 mm, two 76 mm openings with 4.3 mm holes at 71.5 mm, hex grille, 6.5 mm slots at 236.5 mm, PETG.
A 120 mm fan needs 3U. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Kong dog toy drying rack and wall holderA wall rack that holds stuffed Kong Classic toys upside down so they drain and dry after washing, and doubles as the place where the toys live between uses.Cybertruck vault-bin dividerA divider that splits a Cybertruck vault bin into two 150 mm wells for straps and a lock.Tesla Model Y Juniper charge-cable hookA hook that hangs a NACS charge cable on the Juniper Model Y frunk or garage wall so the cable is not on the floor.Garmin Dash Cam Mini 3 mirror clipA clip that hangs a Dash Cam Mini 3 (about 46 × 32 × 32 mm) from a 8–16 mm rear-view mirror stem so you are not on the glass.Frame bag clip for top tubeTop-tube bags held by velcro straps slide and scuff the paint, while a rigid clip holds them square.Laundry basket clip-on dryer sheet caddyDryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold.