Slicing: from STL to G-code for your printer

Cura vs PrusaSlicer vs OrcaSlicer in 2026: which slicer for your printer

Cura, PrusaSlicer and OrcaSlicer compared in 2026: who makes each, what it is built on, which printers it has profiles for, and which to pick for yours.
17 November 2026 · 6 min readslicerscomparisonslicing

Pick by printer first: PrusaSlicer for a Prusa, UltiMaker Cura for an UltiMaker, OrcaSlicer for a Bambu Lab, a Voron or most Klipper machines. For the rest (a Creality, an Elegoo, an Anycubic, a Sovol), all three can do the job as long as your exact model is in their list, and the choice comes down to what you want from the program: OrcaSlicer to tune, PrusaSlicer to start simple and grow, Cura for its plugins. All three are open source, free to download, and run on Windows, macOS and Linux.

The short answer

  • A Prusa printer: PrusaSlicer. The maker's own program, with profiles validated on the hardware.
  • An UltiMaker printer: Cura. Same reason.
  • A Bambu Lab printer: OrcaSlicer among these three, though Bambu Lab's own Bambu Studio comes first; see OrcaSlicer vs Bambu Studio.
  • A Voron, a RatRig or another Klipper build: OrcaSlicer.
  • Any other printer: the one that lists your exact model and nozzle. If all three do, OrcaSlicer for tuning, PrusaSlicer for a gentle start, Cura for plugins.
  • A resin printer as well as a filament one: PrusaSlicer, the only one of the three that also slices for mSLA.

Side by side

UltiMaker CuraPrusaSlicerOrcaSlicer
Made byUltiMakerPrusa ResearchAn open-source project: SoftFever and hundreds of contributors
Built onIts own engine, CuraEngineSlic3rBambu Studio and PrusaSlicer, with ideas from Cura and SuperSlicer
LicenceLGPL-3.0AGPL-3.0AGPL-3.0
Runs onWindows, macOS, Linux (AppImage)Windows, macOS, Linux (Flathub)Windows, macOS, Linux (Flathub or AppImage)
Printer profilesUltiMaker printers, many third-party models, a custom printerEvery Prusa printer, and machines from many other makersHundreds of printers: Bambu Lab, Prusa, Creality, Voron and many more
Printer typesFilamentFilament and resin (mSLA)Filament
How it eases you inRecommended settings first, then a Custom modeSimple, Advanced and Expert modesA search that jumps to any setting
Sends files toUltiMaker printers, over the local network or the Digital FactoryPrusa Connect, the local network, Klipper, OctoPrintPrinters running Klipper, PrusaLink or OctoPrint
Known for400+ settings, a Marketplace of plugins and material profilesOrganic supports, painted supports and colours, a cut tool with alignment pinsBuilt-in calibration, wall and seam control

Two families, three vocabularies

PrusaSlicer and OrcaSlicer are relatives: PrusaSlicer is based on Slic3r, Bambu Lab based Bambu Studio on PrusaSlicer, and OrcaSlicer drew from both. Cura is a separate line, with its own engine. That shows in the words. The solid outlines of a layer are wall loops in OrcaSlicer, perimeters in PrusaSlicer and wall line count in Cura, and a tutorial written for one rarely maps onto another line for line.

It also shows in the numbers. The three give different print times for the same model, because their stock profiles differ in layer height, walls and speeds and each models acceleration in its own way. Compare them with the same settings, never with their defaults.

By printer

Prusa (MK4S, MINI, CORE One, XL). PrusaSlicer. Prusa says it ships more than 200 tested profiles, covering every Prusa printer and filament, validated on real hardware. It writes the binary .bgcode that recent Prusa firmware prefers and sends jobs through Prusa Connect or over the local network.

UltiMaker. Cura, which connects to UltiMaker printers on the local network or through UltiMaker's Digital Factory.

Bambu Lab. Of the three, OrcaSlicer: it carries Bambu Lab's presets and writes the sliced .gcode.3mf these printers expect.

Voron, RatRig, Klipper machines. OrcaSlicer has their profiles and sends to Klipper; its adaptive bed mesh probes only the area the print covers. PrusaSlicer also sends to Klipper and OctoPrint with one click.

Creality, Elegoo, Anycubic, Sovol and the rest. Check each program's printer list for your exact model. OrcaSlicer's bundled profiles are the ones on our printers pages, with bed sizes and layer heights. Cura lists many third-party models, and PrusaSlicer supports machines from many makers. Some makers' own slicers, Creality Print and ElegooSlicer among them, are built on OrcaSlicer, so OrcaSlicer will feel familiar next to them.

A printer in no list. All three let you define a printer yourself. Fill in the bed size, the firmware and the start and end sequence from the maker's documentation; do not borrow another machine's profile.

UltiMaker Cura

UltiMaker's slicer, free and open source, on its own engine. The recommended settings ask for little more than quality and speed, and Custom mode opens more than 400 settings. Its Marketplace offers plugins rated by users and material profiles from filament brands, which saves setting up a third-party filament by hand.

Look elsewhere if your printer is a Bambu Lab or a Prusa, or its maker's software is built on OrcaSlicer: you would be leaving the profiles the maker tests.

PrusaSlicer

Developed by Prusa Research, for filament and resin printers. It begins in Simple mode with defaults that work, then opens to Advanced and Expert. Organic supports touch the model only where they must, supports and colours can be painted on, a cut tool splits a model that is too big and adds pins, and a built-in Printables browser brings a model straight to the plate. All the slicing happens on your computer, with no account.

Look elsewhere if you want calibration tests built into the slicer, or you own a Bambu Lab printer.

OrcaSlicer

A community slicer for filament printers with profiles for hundreds of machines. Its calibration suite (flow rate, pressure advance, temperature towers, retraction, tolerance, maximum volumetric speed) runs inside the program, and it adds scarf seams, sandwich mode, polyholes and per-feature overrides. It needs no account. Download it only from orcaslicer.com or the project's GitHub releases: the project warns about look-alike sites.

Look elsewhere if you would rather not see that many settings on day one, or you need a resin printer sliced too.

On a Chromebook, a tablet or a phone

None of the three runs there: they are desktop programs. Two of the engines do, on a server. Prusa's EasyPrint is a simplified front end for PrusaSlicer on Prusa's servers, on the Printables website and in the Prusa App, with a Prusa Account. SpeakCAD's online slicer runs the unmodified OrcaSlicer with its bundled profiles for 380+ printers and returns the G-code to download; it takes one model per file with standard profiles. The best online slicers compares them.

If you switch

  • Start from the new slicer's stock profile for your printer, not from a copy of the old one. Settings do not carry across families by copy and paste.
  • Carry over the few numbers that matter: layer height, walls, infill, supports. For a functional part, 0.20 mm layers, three walls and about 15% infill is the usual start; slicer settings for functional parts explains each.
  • Print a small test first. A new slicer can place seams and supports differently.
  • Compare times with the same settings. The print time calculator slices a file with OrcaSlicer's profile for your printer, without an account.

The best slicers by printer and by device adds Bambu Studio and the browser route to this comparison.

Sources

Read on 17 November 2026:

The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.

Questions

None is better for every printer. PrusaSlicer is the maker's slicer for Prusa printers and Cura for UltiMaker printers, each with profiles its maker tests. OrcaSlicer suits Bambu Lab, Voron and Klipper machines and anyone who wants built-in calibration tests. For another brand, pick the one that lists your exact printer and nozzle.

Indirectly. PrusaSlicer is based on Slic3r, Bambu Lab based Bambu Studio on PrusaSlicer, and OrcaSlicer's repository says it drew from Bambu Studio and PrusaSlicer, with ideas from Cura and SuperSlicer. Cura is a separate line with its own engine, CuraEngine.

Yes. Prusa Research states that besides Prusa printers, PrusaSlicer supports machines from a wide variety of manufacturers, and it sends files to Klipper and OctoPrint. Check that your exact model is in its list, or define a custom printer from the maker's documentation.

UltiMaker says Cura supports many third-party printer models, chosen from a list of preset printers, and lets you add a custom printer whose machine settings you fill in. Check the list for your exact model before relying on it.

Not by copy and paste. Start from the new slicer's stock profile for your printer and re-enter the few numbers that matter: layer height, walls, infill and supports. The same setting has different names (wall loops in OrcaSlicer, perimeters in PrusaSlicer, wall line count in Cura), and each slicer estimates print time in its own way, so compare with the same settings and print a small test first.

Slice your STL in the browser

Drop an STL or 3MF, pick your printer among 380+ models from 60+ brands with their OrcaSlicer profiles, and download G-code ready to print, with the print time and filament weight. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.