Slicing: from STL to G-code for your printer

The best slicers for 3D printing in 2026, by printer and by device

Which slicer to use in 2026: Bambu Studio, OrcaSlicer, PrusaSlicer or Cura on a computer, a browser slicer on a Chromebook, iPad or phone. By printer.
17 November 2026 · 7 min readslicingslicerscomparison

There is no single best slicer: the right one has a tested profile for your printer and runs on the device in front of you. In 2026 that means Bambu Studio or OrcaSlicer for a Bambu Lab printer, PrusaSlicer for a Prusa, UltiMaker Cura for an UltiMaker, OrcaSlicer for most other machines when you have a computer, and a slicer in the browser when what you have is a Chromebook, an iPad or a phone. The four desktop programs are open source and free to download.

We make SpeakCAD, whose online slicer is one of the five tools below. The facts about the others come from their own pages and repositories, read on 17 November 2026; the sources are at the end, and where ours is not the right pick, the list says so.

The short answer

  • A Bambu Lab printer, with the AMS, the camera and prints sent over the network: Bambu Studio. It is Bambu Lab's own slicer, so nothing sits between it and the printer.
  • Almost any printer, and you like to tune: OrcaSlicer. Calibration tests are built in, it has profiles for hundreds of printers, and it sends jobs to printers running Klipper, PrusaLink or OctoPrint.
  • A Prusa printer, or one program that grows with you: PrusaSlicer. Three modes (Simple, Advanced, Expert) and profiles Prusa validates on its own hardware.
  • An UltiMaker printer, or a workflow built on plugins: UltiMaker Cura. More than 400 settings and a Marketplace of plugins and material profiles.
  • A Chromebook, an iPad, a phone, or a computer you cannot install on: a slicer in the browser. SpeakCAD's online slicer runs OrcaSlicer on a server for 380+ printers; it takes one model per file with standard profiles, and no more.

Side by side

SlicerMade byBuilt onRuns onPrinter profilesKnown for
OrcaSlicerAn open-source project (SoftFever and hundreds of contributors)Bambu Studio and PrusaSlicer, with ideas from Cura and SuperSlicerWindows, macOS, LinuxHundreds of printers: Bambu Lab, Prusa, Creality, Voron and many moreBuilt-in calibration, wall and seam control
Bambu StudioBambu LabPrusaSlicerWindows, macOS, LinuxBambu Lab's printers firstColour painting with automatic AMS mapping, sending and monitoring over the network
PrusaSlicerPrusa ResearchSlic3rWindows, macOS, LinuxEvery Prusa printer, and machines from many other makersOrganic supports, three modes, filament and resin printers
UltiMaker CuraUltiMakerIts own engine, CuraEngineWindows, macOS, LinuxUltiMaker printers, and many third-party models400+ settings, a Marketplace of plugins
SpeakCAD online slicerSpeakCADOrcaSlicer, unmodified, on a serverAny current browser: computer, Chromebook, iPad, phone380+ printers from 60+ brands, with OrcaSlicer's bundled profilesNothing to install; one model per file, standard profiles

By printer

Bambu Lab (A1, A1 mini, P1S, X1 Carbon, H2D). Start with Bambu Studio: it paints colours for the AMS and sends and monitors prints over Bambu's cloud or the local network. OrcaSlicer carries the same presets and adds its calibration tools, but on firmware with Bambu Lab's authorisation system a print started from it goes through the Bambu Connect app, a LAN-only Developer Mode or the microSD card: OrcaSlicer vs Bambu Studio goes through it.

Prusa (MK4S, MINI, CORE One, XL). PrusaSlicer: Prusa says it ships more than 200 tested profiles, covering every Prusa printer and filament. OrcaSlicer has Prusa presets and sends through PrusaLink, if you want one program for several brands.

Creality, Elegoo, Anycubic, Qidi, Flashforge. These makers have their own software, some of it built on OrcaSlicer: Creality Print and ElegooSlicer say so in their repositories. Use it for network sending and the multi-colour box, and OrcaSlicer for one program across brands. Cura also lists many third-party models.

Voron, RatRig and other Klipper builds. OrcaSlicer, which has their profiles and sends straight to Klipper.

UltiMaker. Cura.

A printer in nobody's list. A desktop slicer such as OrcaSlicer, PrusaSlicer or Cura, with a custom profile you fill in yourself. Do not borrow another machine's profile.

By device

  • Windows, macOS, Linux. All four desktop slicers.
  • Chromebook. Desktop slicers run only through the Linux environment, which school and work Chromebooks often have switched off. A browser slicer runs in Chrome: slicer for Chromebook.
  • iPad, iPhone, Android. None of the four has a tablet or phone version. The options are a browser slicer (iPad, iPhone, Android), Prusa's EasyPrint for Prusa owners, or Bambu Handy for models from MakerWorld. The best online slicers compares them.
  • A school or work computer you cannot install on. Ask IT for a desktop slicer, and slice in the browser meanwhile: slicing on a school or work computer.

OrcaSlicer: the default for most printers

An open-source slicer for filament printers that grew out of Bambu Studio and PrusaSlicer. What sets it apart is tuning: flow rate, pressure advance, temperature tower, retraction and tolerance tests are made inside the program, and it gives fine control over walls and seams. It asks for no account. Download it only from orcaslicer.com or the project's GitHub releases: the project warns that look-alike sites pose as the official one.

Look elsewhere if you want the shortest path to a first print on a Bambu Lab or a Prusa printer, or if the number of settings puts you off.

Bambu Studio: the full Bambu Lab experience

Bambu Lab's own slicer, based on PrusaSlicer. A project holds several plates, colours are painted with brushes and mapped to AMS slots automatically, and the printer is controlled and watched from the same window. Its network plugin is optional: without it, you slice and print from the SD card.

Look elsewhere if your printer is not a Bambu Lab, or you want OrcaSlicer's calibration suite.

PrusaSlicer: simple first, expert later

Developed by Prusa Research on the Slic3r code base, for filament printers and resin (mSLA) printers. It starts in Simple mode and opens up to Advanced and Expert. Its organic supports touch the model in few places, supports and colours can be painted on, and a cut tool splits a part that is too big and adds alignment pins. Besides Prusa's printers, it supports machines from many other makers.

Look elsewhere if you own a Bambu Lab printer, or you want calibration tests built in.

UltiMaker Cura: settings and plugins

UltiMaker's slicer runs on its own engine, CuraEngine, not on the Slic3r family's. Its recommended settings ask for little more than quality and speed; Custom mode opens more than 400 settings, and the Marketplace adds plugins and material profiles from filament brands. It lists many third-party models and lets you define a custom printer.

Look elsewhere if your printer is a Bambu Lab or a Prusa, or its maker sends you to a program built on OrcaSlicer.

A slicer in the browser: when there is nothing to install on

SpeakCAD's online slicer takes an STL or 3MF of up to 50 MB, slices it with the unmodified OrcaSlicer and your printer's bundled profile, and returns a .gcode file (a sliced .gcode.3mf for Bambu Lab) with the print time and filament weight. You choose the layer height, filament, infill, supports, speed, walls, bed adhesion and orientation. Free with a free account, no card, no credits: up to 10 files a day (60 on a paid plan).

Look elsewhere if the print needs multi-colour painting, modifiers, variable layer height, a custom start sequence or a layer-by-layer view of the toolpaths: that is desktop work. It also does not connect to a printer: you download the file and send it yourself. Online slicer vs desktop slicer sets out the trade-off.

How we picked

  1. Does it have a tested profile for your exact printer and nozzle? A profile kept up by the printer's maker or by the project beats a borrowed one.
  2. Does it run on the device you have? A desktop, a Chromebook, a tablet, a phone.
  3. How does the file reach the printer? Network sending, the maker's cloud, or a card.
  4. Does it do what this print needs? Colour painting, modifiers, calibration, resin.
  5. Who maintains it, and can you read the code? All four desktop slicers are open source.

Whichever you pick, orientation and walls decide whether a part holds, not the program: which settings matter for a functional part ranks them.

Sources

Read on 17 November 2026:

The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.

Questions

The one with a tested profile for your printer, on the device you have. Bambu Studio or OrcaSlicer for a Bambu Lab printer, PrusaSlicer for a Prusa, UltiMaker Cura for an UltiMaker, and OrcaSlicer for most other printers, a Voron or a Klipper machine. On a Chromebook, an iPad or a phone, where none of them runs, use a slicer in the browser such as SpeakCAD's online slicer.

Bambu Studio to start: it is Bambu Lab's own slicer, it maps colours to the AMS and it sends prints over Bambu's cloud or the local network. OrcaSlicer has the same Bambu Lab presets and adds built-in calibration tests, but on firmware with Bambu Lab's authorisation system a print started from it goes through Bambu Connect, Developer Mode or the microSD card.

Neither is better for every printer. OrcaSlicer grew out of Bambu Studio and PrusaSlicer, has built-in calibration tests and profiles for hundreds of printers, and sends to Klipper, PrusaLink and OctoPrint. UltiMaker Cura runs on its own engine, has more than 400 settings and a Marketplace of plugins, and is the natural choice for an UltiMaker printer. Pick the one with a tested profile for your printer.

Yes, in the browser. OrcaSlicer, Bambu Studio, PrusaSlicer and Cura are desktop programs for Windows, macOS and Linux. SpeakCAD's online slicer runs OrcaSlicer on a server with the profile of your printer, among 380+ models, and gives you the G-code to download. Free with a free account, no card, no credits: up to 10 files a day (60 on a paid plan).

OrcaSlicer, Bambu Studio, PrusaSlicer and UltiMaker Cura are open source and free to download. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.

Slice your STL in the browser

Drop an STL or 3MF, pick your printer among 380+ models from 60+ brands with their OrcaSlicer profiles, and download G-code ready to print, with the print time and filament weight. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.