1
Everyday fixes
Zigbee coordinator USB stand
This is not a fixed STL. SpeakCAD generates the zigbee coordinator usb stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Zigbee dongle stand, 70×70×12 mm base with 40 mm weight pocket, 150 mm column with 13×5 mm USB channel, top clip for 25–30 mm sticks.
What a zigbee coordinator usb stand is
A weighted stand that holds any stick-style Zigbee or Thread coordinator upright on a USB extension, about 150 mm above a shelf, away from USB 3 noise and metal cases. The base is 70 × 70 × 12 mm with a 40 mm coin or washer pocket, the column has a 13 × 5 mm channel for the USB-A plug, and the top clip fits sticks 25–30 mm wide. Print in PETG.
For the ZBDongle-P specifically, use the wall holder. Open the ready-made stand in SpeakCAD for free, change the column height in the viewer or the chat, then download the STL.
People also search
zigbee dongle stand stlzigbee coordinator holder 3d printusb dongle standzigbee stick mount 3d model
Questions people ask about a zigbee coordinator usb stand
A weighted stand that holds any stick-style Zigbee or Thread coordinator upright on a USB extension, about 150 mm above a shelf, away from USB 3 noise and metal cases. The base is 70 × 70 × 12 mm with a 40 mm coin or washer pocket, the column has a 13 × 5 mm channel for the USB-A plug, and the top clip fits sticks 25–30 mm wide. Print in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Zigbee dongle stand, 70×70×12 mm base with 40 mm weight pocket, 150 mm column with 13×5 mm USB channel, top clip for 25–30 mm sticks.
For the ZBDongle-P specifically, use the wall holder. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Bottle cage tool holder insertA tool holder shaped like a water bottle drops into a spare bottle cage and carries a tube, CO2 cartridge and multitool without a saddle bag.Snap cable wrap for charging cablesCharging cables knot in a bag unless something holds the coil, and a rigid wrap works better than a velcro strap that sheds fluff.IKEA Lack side table leg riser 50 mmA riser that slips over the bottom of each IKEA Lack table leg and adds 50 mm of height so a robot vacuum fits underneath or the table reaches sofa arm level.Rivian R1T tonneau prop clipA clip that holds an R1T tonneau prop so it does not rattle in the bed, 20 mm snap.Tesla Model 3 Highland console coin trayA tray that sits in the Highland Model 3 centre-console well (about 180 × 90 mm) and holds coins, a key card and two USB-C tips so they do not rattle.Garmin Edge 540 out-front mount 22.2 mmAn out-front mount that puts an Edge 540 on a 22.2 mm road bar with a Garmin quarter-turn and a GoPro boss underneath.