1
Everyday fixes
Laundry basket clip-on dryer sheet caddy
Dryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold. The caddy has a 30 mm hook lip that grips a rim 5 to 8 mm thick, a 100 x 50 x 80 mm pocket with 1.5 mm walls, a 30 mm dispensing slot on the front for sheets, and a 20 mm side cup for a pen. Printing it upright in PETG gives the hook enough stiffness to hold a full box. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| width (X) | 100 mm |
| depth (Y) | 50 mm |
| height (Z) | 80 mm |
| wall thickness | 1.5 mm |
| corner fillet radius | 4 mm |
| width of hook lip | 30 mm |
| rim thickness to hook over | 6 mm |
| clearance for fit | 0.6 mm |
| thickness of the lip material | 3 mm |
| center height of slot from bottom | 10 mm |
| diameter | 20 mm |
| height | 60 mm |
Example prompt
Design a laundry caddy with a 30 mm hook lip for a 6 mm rim, a 100 x 50 x 80 mm open-top pocket with 1.5 mm walls, a 30 x 8 mm dispensing slot on the front, a 20 mm diameter side cup 60 mm tall, and rounded corners.
Fit notes
Basket rims differ between plastic hampers and wire baskets, so SpeakCAD sizes the lip to your rim and the pocket to your box of sheets, and you can ask for a hanging version for the dryer door in the chat. Preview it before you download.
Questions people ask about a laundry basket clip-on dryer sheet caddy
Dryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold. The caddy has a 30 mm hook lip that grips a rim 5 to 8 mm thick, a 100 x 50 x 80 mm pocket with 1.5 mm walls, a 30 mm dispensing slot on the front for sheets, and a 20 mm side cup for a pen. Printing it upright in PETG gives the hook enough stiffness to hold a full box.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More everyday fixes
Slotted soap dish with drain channelReady-made, opens free. Bar soap turns to mush in a flat dish, while a slotted tray drains water and lets air reach the underside.MOLLE PALS pouch insert organizer for small gearReady-made, opens free. A rigid insert that drops into a soft MOLLE admin pouch on a 5.11, Condor or Helikon pack and turns the sagging fabric into ordered slots for a Leatherman, a…Rimowa Original luggage tag holder with handle strapReady-made, opens free. A rigid card holder that hangs from the telescopic handle of a Rimowa Original, Essential or Classic case, or an Away Carry-On and Samsonite spinner, and sho…Cybertruck vault-bin dividerReady-made, opens free. A divider that splits a Cybertruck vault bin into two 150 mm wells for straps and a lock.Apple Watch Ultra 3 Action-button bumperReady-made, opens free. A TPU bumper that guards the Ultra 3 Action button and siren grille without covering the crown, 52 mm ring 2 mm thick.Cup holder phone mount with gooseneck baseReady-made, opens free. A cup holder phone mount avoids sticky dash pads and suction cups by wedging into a cup holder with an expanding base.