1
Enclosures & cases
Wemos D1 mini and DHT22 wall case
This is not a fixed STL. SpeakCAD generates the wemos d1 mini and dht22 wall case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a D1 mini and DHT22 wall case 60×40×16 mm, 35×26 mm board bay, separate slotted 26×16×8 mm sensor pocket, 12×7 mm USB slot, two keyholes.
What a wemos d1 mini and dht22 wall case is
A wall case for a Wemos D1 mini (34.2 × 25.6 mm) with a DHT22 sensor (25 × 15 × 7.7 mm body) mounted outside the main bay in a slotted pocket, away from the ESP8266's heat. The case is 60 × 40 × 16 mm, the USB slot is 12 × 7 mm, and the back has two 4 mm keyholes. Print in PLA, 1.6 mm walls.
The DHT11 is smaller and blue; the DHT22 is white and longer. Open the model in SpeakCAD without paying, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
d1 mini dht22 case stlwemos d1 mini enclosure 3d printdht22 esp8266 wall cased1 mini sensor box 3d model
Questions people ask about a wemos d1 mini and dht22 wall case
A wall case for a Wemos D1 mini (34.2 × 25.6 mm) with a DHT22 sensor (25 × 15 × 7.7 mm body) mounted outside the main bay in a slotted pocket, away from the ESP8266's heat. The case is 60 × 40 × 16 mm, the USB slot is 12 × 7 mm, and the back has two 4 mm keyholes. Print in PLA, 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a D1 mini and DHT22 wall case 60×40×16 mm, 35×26 mm board bay, separate slotted 26×16×8 mm sensor pocket, 12×7 mm USB slot, two keyholes.
The DHT11 is smaller and blue; the DHT22 is white and longer. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
ESP32-CAM case with lens hole and tripod threadA case for an ESP32-CAM (27 × 40.5 mm board, about 12 mm tall with the OV2640 lens).RAK WisBlock 19007 Meshtastic enclosureAn enclosure for a RAK19007 WisBlock base board (60 × 30 mm) with an RAK4631 core, plus a 50 × 34 × 6 mm LiPo.MicroSD card module caseA case for the common SPI microSD card module (about 42 × 24 mm).Snap-lid enclosure for an Arduino UnoA protective box for an Arduino Uno with openings for the USB-B port and barrel jack, and a lid that clicks on without screws.AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.SONOFF ZBDongle-E protective case with USB extension slotA wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…