1
Enclosures & cases
USB-C PD trigger board case
This is not a fixed STL. SpeakCAD generates the usb-c pd trigger board case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a USB-C PD trigger case, 29×12×6 mm cavity, 9.5×3.8 mm USB-C slot, 4 mm wire exit, strain relief notch, snap halves, 1.2 mm walls.
What a usb-c pd trigger board case is
A sleeve for a small USB-C PD trigger board (about 28 × 11 mm) that asks a charger for 9, 12, 15 or 20 V. The cavity is 29 × 12 × 6 mm with a 9.5 × 3.8 mm USB-C opening, a 4 mm exit for the output wires and a strain-relief notch. Walls are 1.2 mm and the two halves snap together. Print both halves flat in PETG.
The ZY12PDN with a button and LED is a larger board and needs a wider case. Open the ready-made model in SpeakCAD for free, adjust any millimetre, then download the STL.
People also search
usb-c pd trigger case stlpd trigger board enclosure 3d printusb pd decoy casepd trigger housing 3d model
Questions people ask about a usb-c pd trigger board case
A sleeve for a small USB-C PD trigger board (about 28 × 11 mm) that asks a charger for 9, 12, 15 or 20 V. The cavity is 29 × 12 × 6 mm with a 9.5 × 3.8 mm USB-C opening, a 4 mm exit for the output wires and a strain-relief notch. Walls are 1.2 mm and the two halves snap together. Print both halves flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a USB-C PD trigger case, 29×12×6 mm cavity, 9.5×3.8 mm USB-C slot, 4 mm wire exit, strain relief notch, snap halves, 1.2 mm walls.
The ZY12PDN with a button and LED is a larger board and needs a wider case. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
HC-SR501 PIR sensor dome caseA case for an HC-SR501 PIR module (32 × 24 mm board) that lets its 23 mm Fresnel dome poke through a 23.5 mm front hole.Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.Wemos D1 Mini enclosure with DHT22 sensor slotA wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.Arduino Mega 2560 caseA case for an Arduino Mega 2560 R3 (101.5 × 53.3 mm).TP4056 single 18650 power bank caseA power bank case for one 18650 cell (18 × 65 mm) with a USB-C TP4056 charger (about 28 × 17 mm) and a small 5 V boost board.