1
Brackets & mounts
Ubiquiti EdgeRouter X wall mount
This is not a fixed STL. SpeakCAD generates the ubiquiti edgerouter x wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an EdgeRouter X wall bracket, 111×23 mm vertical pocket, open bottom, 3×20 mm vent slots, two 4 mm holes 80 mm apart, PETG.
What a ubiquiti edgerouter x wall mount is
A wall bracket for an EdgeRouter X (about 110 × 75 × 22 mm) that holds it vertically with the five ports facing down. The pocket is 111 × 23 mm with 0.5 mm clearance, the side faces have 3 × 20 mm vent slots, and the plate has two 4 mm countersunk holes 80 mm apart. Print in PETG, 2 mm walls.
The ER-X SFP is wider because of the SFP cage. Open the model in SpeakCAD without paying, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
edgerouter x wall mount stler-x bracket 3d printubiquiti edgerouter x holderedgerouter x mount 3d model
Questions people ask about a ubiquiti edgerouter x wall mount
A wall bracket for an EdgeRouter X (about 110 × 75 × 22 mm) that holds it vertically with the five ports facing down. The pocket is 111 × 23 mm with 0.5 mm clearance, the side faces have 3 × 20 mm vent slots, and the plate has two 4 mm countersunk holes 80 mm apart. Print in PETG, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an EdgeRouter X wall bracket, 111×23 mm vertical pocket, open bottom, 3×20 mm vent slots, two 4 mm holes 80 mm apart, PETG.
The ER-X SFP is wider because of the SFP cage. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
IKEA Skadis holder for Wera Joker wrench setA stepped rack that clips to an IKEA Skadis pegboard and stands an 11-piece Wera Joker combination wrench set (8 to 19 mm) on edge in size order.Peloton Guide camera shelf riserA riser that lifts a Peloton Guide (about 140 × 50 × 25 mm) 40 mm above a TV console so the camera sees over a soundbar.Dyson V12 Detect crevice wand clipA clip that snaps the longer V12 Detect crevice tool onto the slim wand, 38 × 26 × 16 mm with a 30 mm tool saddle and a 34 mm wand snap.DC barrel jack panel mount plateA small plate that adds a 5.5 × 2.1 mm DC jack to a case wall.Wall hook for coiled extension cordsA deep, wide hook that hangs a coiled extension cord or garden lead on the garage wall without kinking it.Garmin Varia radar mount for aero seatpostThe rubber band mount supplied with the Garmin Varia RTL515 and RCT715 is designed for round posts and sits crooked on the D-shaped aero seatposts found on C…