1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Toyota RAV4 Prime charge-cable hook
This is not a fixed STL. SpeakCAD generates the toyota rav4 prime charge-cable hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a toyota rav4 prime charge-cable hook is
A hook that hangs a RAV4 Prime J1772 cable on a garage wall so it is not on the floor. The saddle is 16 mm and two 4.5 mm holes sit on 50 mm centres. Print in PETG with 2.4 mm walls.
The Type 2 Mennekes tidy is a different plug. Describe cable diameter in SpeakCAD, preview the hook in the browser at no cost, then download the STL.
Example prompt
Design a RAV4 Prime charge-cable hook, 16 mm saddle, two 4.5 mm holes on 50 mm centres, 2.4 mm PETG.
People also search
rav4 prime cable hook stlrav4 prime charger holder 3d printrav4 j1772 hookrav4 prime wall hanger 3d model
Questions people ask about a toyota rav4 prime charge-cable hook
A hook that hangs a RAV4 Prime J1772 cable on a garage wall so it is not on the floor. The saddle is 16 mm and two 4.5 mm holes sit on 50 mm centres. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a RAV4 Prime charge-cable hook, 16 mm saddle, two 4.5 mm holes on 50 mm centres, 2.4 mm PETG.
The Type 2 Mennekes tidy is a different plug. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Roborock S8 dock threshold ramp for door sillsA gentle ramp that lets a Roborock S8, S7 MaxV or Q Revo climb a 20 to 25 mm door threshold that otherwise stops it dead, and a matching wedge that levels th…AirTag hidden steerer-cap mountA steerer cap that hides an AirTag under a 1-1/8 inch top cap with a 32 mm well and a 5 mm star-nut hole.AirTag hidden pocket for a MacBook sleeveA 40 × 36 × 10 mm TPU pocket that slips an AirTag into the seam of a 13 or 16-inch MacBook sleeve without a bulge.Specialized Turbo Levo charger holsterA garage holster that parks a Turbo Levo charger (about 180 × 80 × 50 mm) and the charge-port cap.Cup holder insert for narrow cansSlim 250 ml energy cans and small coffee cups rattle in a standard 80 mm car cup holder and tip on corners.Laundry basket clip-on dryer sheet caddyDryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold.