1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
BMW iX armrest key tray
This is not a fixed STL. SpeakCAD generates the bmw ix armrest key tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bmw ix armrest key tray is
A tray that sits in the iX armrest well (about 160 × 90 mm) and holds a key fob plus two cards so they do not rattle. The plate is 156 × 86 × 14 mm. Print in PETG with 1.6 mm walls.
A generic BMW tray misses the iX well. In SpeakCAD you confirm iX vs iX M60, preview the tray in the browser at no cost, then download the STL.
Example prompt
Design a BMW iX armrest key tray 156×86×14 mm with fob and two card wells, 1.6 mm PETG.
People also search
bmw ix tray stlix armrest organizer 3d printbmw ix key holderix console insert 3d model
Questions people ask about a bmw ix armrest key tray
A tray that sits in the iX armrest well (about 160 × 90 mm) and holds a key fob plus two cards so they do not rattle. The plate is 156 × 86 × 14 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a BMW iX armrest key tray 156×86×14 mm with fob and two card wells, 1.6 mm PETG.
A generic BMW tray misses the iX well. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Type 2 Mennekes cable-tidy hookA 120 mm hook that holds a coiled Type 2 cable on a garage wall with a 8 mm drain so rain does not sit in the loop.Rivian R1S door-pocket bottle stopA stop that keeps a 70 mm bottle from falling out of an R1S door pocket on a trail.Bottle cage adapter for small framesSmall frames and full-suspension bikes often leave no room for a standard bottle cage in the normal position.Aquarium plant tweezers and scissors holderAquascaping tools are long and sharp, and leaving them on the cabinet top means wet drips and lost tweezers.Google Pixel Buds Pro 2 case carabiner clip holderA cradle that snaps around the Google Pixel Buds Pro 2 charging case (about 63 x 50 x 25 mm) and adds a carabiner loop so the earbuds clip onto a bag strap o…iPhone 17 Pro Max MagSafe car vent mountA clip-on car vent mount for an iPhone 17 Pro Max (about 163 × 78 × 8.8 mm) that hangs from a horizontal slat 8–14 mm thick.