1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
SRAM AXS battery wall caddy
This is not a fixed STL. SpeakCAD generates the sram axs battery wall caddy to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sram axs battery wall caddy is
A caddy that hangs four AXS batteries (about 40 × 20 × 15 mm) on a 4.5 mm hole pair so spares are not in a bag. Each well is 42 × 22 × 16 mm. The plate is 160 × 50 × 20 mm. Print in PETG with 1.6 mm walls.
A generic AA caddy is the wrong size. In SpeakCAD you add a charger well, preview the caddy in the browser without paying, then download the STL.
Example prompt
Model an AXS battery wall caddy 160×50×20 mm, four 42×22×16 mm wells, two 4.5 mm holes, 1.6 mm PETG.
People also search
sram axs battery caddy stlaxs battery holder 3d printsram axs wall rackaxs spare battery tray 3d model
Questions people ask about a sram axs battery wall caddy
A caddy that hangs four AXS batteries (about 40 × 20 × 15 mm) on a 4.5 mm hole pair so spares are not in a bag. Each well is 42 × 22 × 16 mm. The plate is 160 × 50 × 20 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an AXS battery wall caddy 160×50×20 mm, four 42×22×16 mm wells, two 4.5 mm holes, 1.6 mm PETG.
A generic AA caddy is the wrong size. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Whiskas and Felix cat food pouch dispenser boxA gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead…DeWalt TSTAK VI oscillating-tool insertAn insert for a TSTAK VI deep box that holds a DCS356, eight blades in 2 mm slots, and the charger.Dyson Supersonic nozzle magnetic caddyA caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger.Milwaukee Packout Low-Profile Organizer dividersA set of dividers that split a Packout Low-Profile Organizer (about 380 × 250 mm) into six 120 × 80 mm wells for fittings.Entryway catch-all tray for keys and walletA low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.Milwaukee Packout bit holder insert for 1/4 hex bitsA drop-in insert for the Milwaukee Packout Low-Profile Organizer that turns one of its removable bins into a dedicated 1/4 inch hex bit station.