1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Specialized Turbo Levo charger holster
This is not a fixed STL. SpeakCAD generates the specialized turbo levo charger holster to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a specialized turbo levo charger holster is
A garage holster that parks a Turbo Levo charger (about 180 × 80 × 50 mm) and the charge-port cap. Two 4.5 mm holes sit on 80 mm centres. Print in PETG with 2 mm walls.
The Levo SL bottle-cage adapter is a different part. Tell SpeakCAD SL vs full Levo, preview the holster in the browser for free, then download the STL.
Example prompt
Create a Turbo Levo charger holster 180×80×50 mm with a cap well and two 4.5 mm holes, 2 mm PETG.
People also search
levo charger holster stlspecialized levo charger holder 3d printturbo levo wall docklevo ebike charger mount 3d model
Questions people ask about a specialized turbo levo charger holster
A garage holster that parks a Turbo Levo charger (about 180 × 80 × 50 mm) and the charge-port cap. Two 4.5 mm holes sit on 80 mm centres. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Turbo Levo charger holster 180×80×50 mm with a cap well and two 4.5 mm holes, 2 mm PETG.
The Levo SL bottle-cage adapter is a different part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Cup holder insert for narrow cansSlim 250 ml energy cans and small coffee cups rattle in a standard 80 mm car cup holder and tip on corners.Laundry basket clip-on dryer sheet caddyDryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold.Tesla Model 3 seat gap filler for center consoleA wedge that fills the 25 to 35 mm gap between the front seat and the center console in a Tesla Model 3 or Model Y so keys, cards and fries stop disappearing…Uppababy Vista V3 cup-holder clampA clamp that puts a 70 mm cup on a Vista V3 handlebar, 22 mm snap and a 2 mm drain.Meshtastic T-Deck Plus dash cradleA dash cradle that holds a T-Deck Plus at 40 degrees with a 14 mm USB-C slot and a 20 mm antenna clearance.Honda Civic 11th-gen seat-gap trayA tray that fills the gap between an 11th-gen Civic seat and the console (about 30 mm) so phones stop falling.