Adapters & couplers

Sim racing wheel spacer, 70 mm bolt circle

A spacer ring that fits between a sim racing wheel rim and its hub and brings the rim 15 mm closer to you. It follows the common 6-bolt pattern, six 5.5 mm holes for M5 bolts on a 70 mm circle, with a 90 mm outer diameter and a 52 mm bore for the cable. The faces must be flat and parallel, so print it flat with six perimeters and solid infill around the holes, in PETG or ASA, without supports. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design a spacer ring that moves a sim racing wheel rim 15 mm closer to the driver, between the rim and the hub. Outer diameter 90 mm, centre bore 52 mm, 15 mm thick, both faces flat and parallel. Six 5.5 mm through holes for M5 bolts, evenly spaced on a 70 mm bolt circle. 0.6 mm chamfer on all outer edges. Print flat with six perimeters and 100 percent infill, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

How far the rim should come towards you depends on your paddles, your quick release and your arms, so a fixed 15 mm is rarely the answer; too thick, and the bolts supplied with the rim no longer reach. In SpeakCAD the thickness, the bore and the bolt circle are numbers. A printed spacer is fine on a belt-driven or lower-torque base; on a strong direct drive base, use it to find the distance, then have it made in aluminium.

Also searched as: sim racing wheel spacer stl, 70mm pcd spacer 3d print, steering wheel hub spacer 6x70, sim wheel spacer 15mm.

Questions people ask about a sim racing wheel spacer, 70 mm bolt circle

A spacer ring that fits between a sim racing wheel rim and its hub and brings the rim 15 mm closer to you. It follows the common 6-bolt pattern, six 5.5 mm holes for M5 bolts on a 70 mm circle, with a 90 mm outer diameter and a 52 mm bore for the cable. The faces must be flat and parallel, so print it flat with six perimeters and solid infill around the holes, in PETG or ASA, without supports.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your sim racing wheel spacer, 70 mm bolt circle

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the adapters & couplers on the marketplace, where makers share their models, most of them free.