1
Adapters & couplers
Shop-Vac 2-1/2 inch hose to 4 inch dust port adapter
This is not a fixed STL. SpeakCAD generates the shop-vac 2-1/2 inch hose to 4 inch dust port adapter to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a dust port adapter, 102 mm socket 30 mm deep to 63.5 mm tapered socket, 60 mm cone, 2.4 mm walls, no supports.
What a shop-vac 2-1/2 inch hose to 4 inch dust port adapter is
An adapter that connects a 2-1/2 inch shop vacuum hose to a tool with a 4 inch dust port, such as a table saw or bandsaw. The large end is a 102 mm socket that slides over a 4 inch port, 30 mm deep, and the small end is a tapered 63 mm socket for the vac hose cuff, joined by a 60 mm cone. Walls are 2.4 mm. Print upright in PETG without supports.
Some metric machines use 100 mm ports that are loose in a 102 mm socket; change it in the chat. Open the adapter in SpeakCAD for free, adjust any diameter in the viewer or the chat, then download the STL.
People also search
shop vac to 4 inch adapter4 inch dust port adapter stldust collection adapter 3d printshop vac table saw adapter
Questions people ask about a shop-vac 2-1/2 inch hose to 4 inch dust port adapter
An adapter that connects a 2-1/2 inch shop vacuum hose to a tool with a 4 inch dust port, such as a table saw or bandsaw. The large end is a 102 mm socket that slides over a 4 inch port, 30 mm deep, and the small end is a tapered 63 mm socket for the vac hose cuff, joined by a 60 mm cone. Walls are 2.4 mm. Print upright in PETG without supports.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a dust port adapter, 102 mm socket 30 mm deep to 63.5 mm tapered socket, 60 mm cone, 2.4 mm walls, no supports.
Some metric machines use 100 mm ports that are loose in a 102 mm socket; change it in the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
LoRa 868 MHz antenna mast clip for 25 mm poleA clip that fixes an SMA-mount 868 or 915 MHz LoRa whip antenna to a 25 mm pole so a Meshtastic or Helium node gets height and a clear view.Rode Wireless GO II receiver cold shoe cradleA cradle that fixes a Rode Wireless GO II receiver, which is 44 x 45.3 x 18.5 mm, onto the hot shoe of a Sony A7 IV, Canon EOS R6 or Fujifilm X-T5 without re…Ortlieb Ultimate 6 bar adapter 31.8 mmAn adapter that lets an Ultimate 6 mount clamp a 31.8 mm bar instead of the 25.4 it assumes, 4 mm shim pair.VW Golf 8 cup holder bottle adapterAn adapter that plugs into a Golf 8 front cup holder and widens it for a 1 litre sports bottle or a 90 mm tumbler.Lampshade reducer ring, 40 mm to 28 mm fittingA thin ring that lets a lampshade with a 40 mm European fitting sit on a lamp with a 28 mm bayonet holder, the perennial problem when shades and lamps come f…MagSafe charger puck to 1/4-20 tripod mount adapterA holder that turns an Apple MagSafe charger puck (56 mm diameter, about 5.5 mm thick) into a magnetic tripod head, so an iPhone 16 Pro snaps onto any tripod…