1
Enclosures & cases
SH1106 1.3 inch OLED case
This is not a fixed STL. SpeakCAD generates the sh1106 1.3 inch oled case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 1.3 inch SH1106 OLED case, 30×15.5 mm window, four M2 pegs, 37×35×8 mm back shell, 4-pin cable slot, 1.2 mm walls.
What a sh1106 1.3 inch oled case is
A front bezel and back shell for a 1.3 inch SH1106 I2C OLED module (about 35.5 × 33.5 mm). The window is 30 × 15.5 mm over the active area, four M2 pegs match the module holes, and the 37 × 35 × 8 mm back shell has a 4-pin cable slot. Walls are 1.2 mm. Print the bezel face-down in PLA.
The 0.96 inch SSD1306 module is 27 × 27 mm with a smaller glass, so its bezel is too small. Open the ready-made model in SpeakCAD for free, adjust the window in the viewer or the chat, then download the STL.
People also search
1.3 inch oled case stlsh1106 oled enclosure 3d print1.3 oled bezelsh1106 display case 3d model
Questions people ask about a sh1106 1.3 inch oled case
A front bezel and back shell for a 1.3 inch SH1106 I2C OLED module (about 35.5 × 33.5 mm). The window is 30 × 15.5 mm over the active area, four M2 pegs match the module holes, and the 37 × 35 × 8 mm back shell has a 4-pin cable slot. Walls are 1.2 mm. Print the bezel face-down in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 1.3 inch SH1106 OLED case, 30×15.5 mm window, four M2 pegs, 37×35×8 mm back shell, 4-pin cable slot, 1.2 mm walls.
The 0.96 inch SSD1306 module is 27 × 27 mm with a smaller glass, so its bezel is too small. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Adafruit Feather case for a FeatherWing stackAn enclosure built around the Adafruit Feather form factor: 50.8 x 22.8 mm boards with 2.5 mm mounting holes on a 45.72 x 17.78 mm pattern.Home Assistant Yellow DIN-rail clipA clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap.Adafruit QT Py caseA snap case for an Adafruit QT Py (about 20.3 × 17.8 mm, RP2040, ESP32-S3 or SAMD21).INA219 power meter caseA case for an INA219 current sensor module (about 25 × 22 mm), a 0.91 inch OLED and a Nano or ESP32-C3 as an inline power meter.HC-SR501 PIR sensor dome caseA case for an HC-SR501 PIR module (32 × 24 mm board) that lets its 23 mm Fresnel dome poke through a 23.5 mm front hole.Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.