1
Enclosures & cases
Raspberry Pi 3B+ case
This is not a fixed STL. SpeakCAD generates the raspberry pi 3b+ case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Raspberry Pi 3B+ case, 87×58×24 mm cavity, micro-USB, HDMI, audio, USB and Ethernet openings, microSD notch, M2.5 standoffs at 58×49 mm.
What a raspberry pi 3b+ case is
A two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm). The cavity is 87 × 58 × 24 mm with openings for the micro-USB power, full-size HDMI, 3.5 mm jack, four USB-A and Ethernet ports, a microSD notch and a slot for the camera ribbon. Walls are 2 mm with four M2.5 standoffs at 58 × 49 mm. Print both halves flat in PLA.
A Pi 4 or Pi 5 case has micro-HDMI openings and a USB-C slot in the wrong place. Open the ready-made model in SpeakCAD for free, adjust the openings, then download the STL.
People also search
raspberry pi 3b+ case stlpi 3 b plus enclosure 3d printraspberry pi 3 casepi 3b+ case 3d model
Questions people ask about a raspberry pi 3b+ case
A two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm). The cavity is 87 × 58 × 24 mm with openings for the micro-USB power, full-size HDMI, 3.5 mm jack, four USB-A and Ethernet ports, a microSD notch and a slot for the camera ribbon. Walls are 2 mm with four M2.5 standoffs at 58 × 49 mm. Print both halves flat in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Raspberry Pi 3B+ case, 87×58×24 mm cavity, micro-USB, HDMI, audio, USB and Ethernet openings, microSD notch, M2.5 standoffs at 58×49 mm.
A Pi 4 or Pi 5 case has micro-HDMI openings and a USB-C slot in the wrong place. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
ESP32-CAM case with lens hole and tripod threadA case for an ESP32-CAM (27 × 40.5 mm board, about 12 mm tall with the OV2640 lens).Heltec Mesh Node T114 caseA pocket case for a Heltec Mesh Node T114 (about 51 × 23 mm) with the optional 1.14 inch TFT and a 40 × 30 × 5 mm LiPo.GPS NEO-6M module case with antenna windowA case for the GY-NEO6MV2 GPS module (about 36 × 25 mm) with its 25 × 25 mm ceramic patch antenna.Snap-lid enclosure for an Arduino UnoA protective box for an Arduino Uno with openings for the USB-B port and barrel jack, and a lid that clicks on without screws.AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.SONOFF ZBDongle-E protective case with USB extension slotA wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…