Adapters & couplers

PopSocket base to MagSafe ring adapter plate

A thin plate that takes a standard PopSocket PopGrip base on one side and a stick-on MagSafe ring on the other, so the grip snaps onto an iPhone 15, 16 or Galaxy S25 by magnet and lifts off for wireless charging. The PopGrip base is 40 mm across, so the front has a 40.4 mm pocket 1 mm deep with a locating lip, and the back has a 56.5 mm pocket 1.8 mm deep for the magnet ring. The plate is 60 mm across and 4 mm thick and prints flat in PETG.

PopSockets sells its own MagSafe version but not for every grip design, and downloaded adapters ignore ring thickness. In SpeakCAD you describe the base you have and the ring you bought, preview the plate free in the browser, refine pocket depths in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a 60 mm diameter, 4 mm thick adapter plate with a 40.4 mm diameter, 1 mm deep pocket and 0.5 mm locating lip for a PopSocket PopGrip base on the front and a 56.5 mm diameter, 1.8 mm deep pocket for a stick-on MagSafe ring on the back.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More adapters & couplers

UniFi Flex Mini switch DIN rail adapterAn adapter that clips a Ubiquiti UniFi Flex Mini five-port switch onto a 35 mm DIN rail inside a network cabinet or smart home panel.Dyson V11 wand to 32 mm standard vacuum tool adapterAn adapter that clicks onto the wand or motor body of a Dyson V11, V10 or V15 and presents a standard 32 mm spigot so universal crevice tools, brush heads an…Sony A7 IV Arca-Swiss plate with anti-twist lipA camera-specific Arca-Swiss plate for the Sony A7 IV, A7R V and A7C II that cannot rotate on the 1/4-20 tripod socket because a 4 mm lip hooks the rear edge…Dust extraction adapter, 35 mm tool port to 58 mm hoseA tapered adapter that connects the small 35 mm dust port on a sander or router to the 58 mm hose of a shop vacuum, so chips end up in the bin instead of on…Speaker stand pole adapter, 35 mm socketA cup that fits over a 35 mm speaker stand pole and provides a flat top with screw holes for a monitor speaker or small light that lacks a pole socket.GoPro mount to Garmin quarter-turn adapter for bike lightsA puck that lets a bike light with a GoPro-style two-finger foot, such as a Knog Blinder, Exposure Strada or Magicshine, hang from a spare Garmin quarter-tur…

Make your popsocket base to magsafe ring adapter plate now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.