1
Hobby & gaming
MXR pedal riser
This is not a fixed STL. SpeakCAD generates the mxr pedal riser to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a pedal riser for an MXR pedal, 66×114 mm top plate with 1 mm velcro recess, 20 mm high, 10° sides, hollow underneath for cables.
What a mxr pedal riser is
A riser that lifts a standard MXR pedal (about 64 × 112 × 51 mm, like the Phase 90 or Dyna Comp) 20 mm above the back row so you can stomp it without hitting the pedals in front. The top plate is 66 × 114 mm with a 1 mm recess for hook-and-loop tape, the sides are angled 10° and the underside is hollow for patch cables. Print upside down in PETG.
MXR Mini pedals are much smaller (about 44 × 92 mm) and need their own riser. Open the ready-made model in SpeakCAD for free, change the height in the viewer or the chat, then download the STL.
People also search
mxr pedal riser stlguitar pedal riser 3d printmxr pedalboard riserpedal riser 3d model
Questions people ask about a mxr pedal riser
A riser that lifts a standard MXR pedal (about 64 × 112 × 51 mm, like the Phase 90 or Dyna Comp) 20 mm above the back row so you can stomp it without hitting the pedals in front. The top plate is 66 × 114 mm with a 1 mm recess for hook-and-loop tape, the sides are angled 10° and the underside is hollow for patch cables. Print upside down in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a pedal riser for an MXR pedal, 66×114 mm top plate with 1 mm velcro recess, 20 mm high, 10° sides, hollow underneath for cables.
MXR Mini pedals are much smaller (about 44 × 92 mm) and need their own riser. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Nintendo Switch 2 game-card display rail 24A 280 mm rail that displays 24 Switch / Switch 2 game cards in 22 × 4 mm slots at 15 degrees.Steam Deck OLED front-plate standA stand that holds a Deck OLED (about 298 × 117 × 49 mm) by the front plate at 30 degrees so the kickstand is not the only option.Xbox Series X side controller and headset hookA tape-on hook for the side of an Xbox Series X (151 mm wide sides) that holds one controller on a 36 mm tongue and a headset on a 45 mm rounded arm below it.Roland SP-404MKII angled standA stand that tilts a Roland SP-404MKII (about 179 × 312 × 76 mm) 15° towards you so the pads and screen are easier to play.Guitar wall hanger with padded yokeA wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.Pokémon TCG toploader wall display rackA wall rack that shows twelve Pokémon TCG cards in standard 3 x 4 inch toploaders (76 x 102 mm, about 2 mm thick for a 35 pt sleeve) in three rows of four.