1
Adapters & couplers
Motorcycle intercom helmet clamp shim
This is not a fixed STL. SpeakCAD generates the motorcycle intercom helmet clamp shim to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a helmet intercom clamp shim, 50×30 mm, 2 mm thick, 150 mm curve, 1 mm edge step, grip ribs on both faces, TPU.
What a motorcycle intercom helmet clamp shim is
A shim that fills the gap between a Sena or Cardo clamp-style intercom mount and a thin helmet shell, so the unit stops rocking at speed. It is 50 × 30 mm, from 1.5 to 3 mm thick, curved to a 150 mm radius, with a 1 mm step that sits against the shell edge and grip ribs on both faces. Print flat in TPU for grip, or PETG for a rigid spacer.
Adhesive intercom mounts do not need a shim, only clamp versions do. Open the ready-made shim in SpeakCAD for free, change the thickness or any millimetre in the viewer or the chat, then download the STL.
People also search
sena clamp shimcardo helmet clamp spacerintercom helmet mount shim stlmotorcycle intercom mount 3d print
Questions people ask about a motorcycle intercom helmet clamp shim
A shim that fills the gap between a Sena or Cardo clamp-style intercom mount and a thin helmet shell, so the unit stops rocking at speed. It is 50 × 30 mm, from 1.5 to 3 mm thick, curved to a 150 mm radius, with a 1 mm step that sits against the shell edge and grip ribs on both faces. Print flat in TPU for grip, or PETG for a rigid spacer.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a helmet intercom clamp shim, 50×30 mm, 2 mm thick, 150 mm curve, 1 mm edge step, grip ribs on both faces, TPU.
Adhesive intercom mounts do not need a shim, only clamp versions do. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
JOBY GorillaPod 3K phone saddleA saddle that puts a 70–85 mm phone on a GorillaPod 3K ball head with a 1/4-20 insert.RAM AMPS to GoPro three-prong adapterA plate that bolts to the AMPS hole pattern of a RAM round base (four holes on a 30 × 38 mm rectangle) and turns it into a three-prong GoPro mount.Adapter plate to remount a PCB on a different hole patternA thin intermediate plate that lets a circuit board with one set of mounting holes attach to an enclosure or chassis drilled for another.Knog Blinder light to GoPro mount adapterKnog Blinder and Plus lights strap around a handlebar with an integrated silicone band, which means they cannot use the GoPro mount under most out-front comp…Raspberry Pi 5 USB-C power cable strain relief bootA snap-on boot that supports the USB-C plug of the official Raspberry Pi 27 W power supply where it meets the Pi 5, preventing the wiggle that causes undervo…Sony A7 IV Arca-Swiss plate with anti-twist lipA camera-specific Arca-Swiss plate for the Sony A7 IV, A7R V and A7C II that cannot rotate on the 1/4-20 tripod socket because a 4 mm lip hooks the rear edge…