1
Hobby & gaming
Logitech Driving Force Shifter desk clamp mount
This is not a fixed STL. SpeakCAD generates the logitech driving force shifter desk clamp mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Driving Force Shifter desk mount, 180×140 mm plate with lip, 60 mm riser, C-clamp for a 40 mm desk with M8 bolt, 5 mm walls.
What a logitech driving force shifter desk clamp mount is
A side mount for the Logitech Driving Force Shifter used with the G29, G920 and G923 (the shifter base is about 165 × 125 mm) that clamps to a desk up to 40 mm thick and raises the shifter 60 mm to wheel height. The 180 × 140 mm plate has a lip that the shifter's own clamp grips, and the clamp uses an M8 bolt. Print in PETG at 60 % infill, 5 mm walls.
The Fanatec ClubSport Shifter is heavier and bolts on instead. Open the mount in SpeakCAD for free, set your desk thickness in the viewer or the chat, then download the STL.
People also search
logitech shifter mount stlg923 shifter desk mount 3d printdriving force shifter clampg29 shifter mount
Questions people ask about a logitech driving force shifter desk clamp mount
A side mount for the Logitech Driving Force Shifter used with the G29, G920 and G923 (the shifter base is about 165 × 125 mm) that clamps to a desk up to 40 mm thick and raises the shifter 60 mm to wheel height. The 180 × 140 mm plate has a lip that the shifter's own clamp grips, and the clamp uses an M8 bolt. Print in PETG at 60 % infill, 5 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Driving Force Shifter desk mount, 180×140 mm plate with lip, 60 mm riser, C-clamp for a 40 mm desk with M8 bolt, 5 mm walls.
The Fanatec ClubSport Shifter is heavier and bolts on instead. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Game controller stand for two padsA controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed.PS5 DualSense dual controller charging standA twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…Meta Quest 3S Elite strap wall dockA wall dock that holds a Quest 3S with the Elite battery strap hanging on a 40 mm hook and the headset sitting in a 180 mm wide cradle.AYANEO KUN travel standA folding stand that holds an AYANEO KUN at 50 degrees with a 14 mm USB-C slot, two pieces on a 6 mm pin.DualSense single wall hook with cable slotA single hook that holds one DualSense (160 × 66 × 106 mm) face out with its USB-C cable plugged in.Sim rig aluminium profile cable clipA snap-in cable clip for 40 series aluminium profile rigs with an 8 mm slot.