1
Replacement parts
IKEA TRETUR roller blind bracket
This is not a fixed STL. SpeakCAD generates the ikea tretur roller blind bracket to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an IKEA TRETUR bracket, 40×40 mm, socket for the end pin, two 4 mm screw holes, PETG.
What a ikea tretur roller blind bracket is
A replacement bracket for IKEA TRETUR and FRIDANS roller blinds, the small wall or ceiling fixing each end of the blind clicks into. It is about 40 × 40 mm with a socket that takes the blind end pin, a spring-free snap that holds it, and two 4 mm countersunk screw holes. Print on its back in PETG with 4 walls so the socket does not split.
SKOGSKLÖVER and HOPPVALS use different fixings, so compare the socket shape with your blind end. Open the ready-made bracket free in SpeakCAD, adjust the socket in the chat or the viewer, then download the STL.
People also search
ikea tretur bracketikea fridans bracket replacementikea roller blind bracket 3d printtretur bracket stl
Questions people ask about a ikea tretur roller blind bracket
A replacement bracket for IKEA TRETUR and FRIDANS roller blinds, the small wall or ceiling fixing each end of the blind clicks into. It is about 40 × 40 mm with a socket that takes the blind end pin, a spring-free snap that holds it, and two 4 mm countersunk screw holes. Print on its back in PETG with 4 walls so the socket does not split.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an IKEA TRETUR bracket, 40×40 mm, socket for the end pin, two 4 mm screw holes, PETG.
SKOGSKLÖVER and HOPPVALS use different fixings, so compare the socket shape with your blind end. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA BROR caster brake wedgeA wedge that chocks a BROR 100 mm caster so the trolley does not roll when you open a drawer.Prusa CORE One riser feetRiser feet for a Prusa CORE One (about 415 × 435 mm footprint) that lift it 30 mm so the bottom intake gets more air and a drawer tray can slide under the fr…LG dishwasher lower rack rollerA lower rack roller for LG dishwashers, the snap-on wheel that goes missing from the bottom rack (about 30 mm across on most QuadWash models).KitchenAid mixer hub cover thumbscrew knobA replacement head for the attachment-hub thumbscrew on KitchenAid tilt-head and bowl-lift stand mixers, the knurled knob that locks the hub cover and attach…Stroller wheel hub capA lost hub cap lets grit into a stroller wheel bearing and exposes a sharp axle end, and manufacturers seldom sell the cap alone.Track-saw splinter-guard replacement stripA 1400 mm splinter-guard strip in 200 mm sections that clip onto a Festool / Makita style track's 4 mm T-slot.