1
Brackets & mounts
Honda Civic 11th gen honeycomb vent phone mount
This is not a fixed STL. SpeakCAD generates the honda civic 11th gen honeycomb vent phone mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Honda Civic honeycomb vent mount, two 5 mm prongs 18 mm deep with 3 mm hooks 20 mm apart, 57 mm MagSafe puck cup, PETG.
What a honda civic 11th gen honeycomb vent phone mount is
A phone mount for the full-width honeycomb vent strip of a 2022 or later Civic, with two hooked prongs that go through the mesh and lock behind it instead of pinching one slat. The prongs are 5 mm wide and 18 mm deep with a 3 mm hook, spaced 20 mm apart; the face plate carries a 57 mm MagSafe puck cup (puck about 56 mm across). Print on its side in PETG or ASA so the hooks are strong.
The mesh cells vary slightly between trims, so measure yours and change the prong size in the chat. Open the ready-made mount in SpeakCAD for free, adjust any millimetre in the viewer, then download the STL.
People also search
honda civic 11th gen phone mountcivic honeycomb vent phone holdercivic 2022 phone mount stlhonda civic magsafe mount 3d print
Questions people ask about a honda civic 11th gen honeycomb vent phone mount
A phone mount for the full-width honeycomb vent strip of a 2022 or later Civic, with two hooked prongs that go through the mesh and lock behind it instead of pinching one slat. The prongs are 5 mm wide and 18 mm deep with a 3 mm hook, spaced 20 mm apart; the face plate carries a 57 mm MagSafe puck cup (puck about 56 mm across). Print on its side in PETG or ASA so the hooks are strong.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Honda Civic honeycomb vent mount, two 5 mm prongs 18 mm deep with 3 mm hooks 20 mm apart, 57 mm MagSafe puck cup, PETG.
The mesh cells vary slightly between trims, so measure yours and change the prong size in the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
NRF24L01 PA+LNA antenna module holderA holder for the NRF24L01+PA+LNA module (about 41 × 16 mm with the SMA antenna).Toyota RAV4 5th gen cup holder phone mountA phone mount for the front cup holders of a 2019 or later RAV4 that lifts the phone level with the dash screen.Camera cage HDMI cable clampA clamp that locks a full-size HDMI cable next to the camera port so a tug on the cable does not break the socket.Hidden AirTag mount under bike saddle railsA small clamshell that bolts between the two 7 mm rails under a bicycle saddle and hides an Apple AirTag (31.9 mm diameter, 8 mm thick) where a thief will no…Bambu Lab A1 AMS Lite spool holder riser bracketA riser that lifts the Bambu Lab AMS Lite 60 mm above the desk so the four spools clear the A1 or A1 mini bed when the printer sits on a shelf, and adds feet…Aqara Hub M3 under-shelf clipA clip that hides an Aqara Hub M3 under a 12–24 mm shelf with the USB-C facing out.