1
Organizers & storage
Gridfinity bin for 1/4 inch drive metric sockets
This is not a fixed STL. SpeakCAD generates the gridfinity bin for 1/4 inch drive metric sockets to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 3×2 Gridfinity bin, 3 units tall, twelve 6.1 mm square posts 8 mm tall for 1/4 inch drive sockets 4 to 14 mm, embossed sizes.
What a gridfinity bin for 1/4 inch drive metric sockets is
A 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 3 units tall) with twelve square posts for 1/4 inch drive sockets from 4 to 14 mm. Each post is 6.1 mm square and 8 mm tall so the 6.35 mm drive opening clicks over it, and the pitch grows from 16 to 22 mm as sockets get bigger. Sizes are embossed in front of each post. Print in PETG.
3/8 inch drive sockets have a 9.5 mm square and will not sit on these posts. The model opens free in SpeakCAD; change any post in the viewer or the chat, then download the STL.
People also search
gridfinity socket holdergridfinity sockets stl1/4 drive socket organizersocket holder 3d print
Questions people ask about a gridfinity bin for 1/4 inch drive metric sockets
A 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 3 units tall) with twelve square posts for 1/4 inch drive sockets from 4 to 14 mm. Each post is 6.1 mm square and 8 mm tall so the 6.35 mm drive opening clicks over it, and the pitch grows from 16 to 22 mm as sockets get bigger. Sizes are embossed in front of each post. Print in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 3×2 Gridfinity bin, 3 units tall, twelve 6.1 mm square posts 8 mm tall for 1/4 inch drive sockets 4 to 14 mm, embossed sizes.
3/8 inch drive sockets have a 9.5 mm square and will not sit on these posts. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
XLR cable wall hanger with five saddlesA studio wall hanger for coiled XLR and instrument cables.Gridfinity bin for SDS-plus drill bitsA 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 6 units tall) for SDS-plus masonry bits, whose shanks are 10 mm across.Raspberry Pi HAT storage rack with labelled slotsA vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.Fujifilm X100VI 49 mm filter and lens cap holderA desk or bag organizer for the small kit that the Fujifilm X100VI and X100V accumulate: the AR-X100 adapter ring, two or three 49 mm filters and the slip-on…Framework 16 input-module trayA tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.Keychron K2 HE travel-case insertAn insert that keeps a K2 HE (about 315 × 128 × 40 mm) from sliding in a sleeve, with a 317 × 130 mm well and a 20 mm cable trough.