1
Adapters & couplers
GoPro Hero 13 to 1/4-20 tripod adapter
This is not a fixed STL. SpeakCAD generates the gopro hero 13 to 1/4-20 tripod adapter to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a GoPro to 1/4-20 adapter, three 3 mm fingers 15 mm wide with 3.2 mm gaps, 5.2 mm M5 hole, 25 mm base with a captive 1/4-20 nut.
What a gopro hero 13 to 1/4-20 tripod adapter is
An adapter that puts a GoPro Hero 13 Black (71.8 × 50.8 × 33.6 mm) on any tripod or phone clamp with a 1/4-20 screw. The top has three 3 mm fingers 15 mm wide with 3.2 mm gaps for the camera's two folding fingers and a 5.2 mm hole for the M5 thumbscrew, and the 25 mm base holds a captive 1/4-20 nut. Print on its side in PETG.
It works with any GoPro that has folding fingers (Hero 8 and later), but not with older frames that need the quick-release buckle. Open the ready-made model in SpeakCAD for free, change the height or any millimetre, then download the STL.
People also search
gopro to tripod adapter stlgopro hero 13 tripod mount 3d printgopro 1/4 20 adaptergopro finger to tripod screw
Questions people ask about a gopro hero 13 to 1/4-20 tripod adapter
An adapter that puts a GoPro Hero 13 Black (71.8 × 50.8 × 33.6 mm) on any tripod or phone clamp with a 1/4-20 screw. The top has three 3 mm fingers 15 mm wide with 3.2 mm gaps for the camera's two folding fingers and a 5.2 mm hole for the M5 thumbscrew, and the 25 mm base holds a captive 1/4-20 nut. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a GoPro to 1/4-20 adapter, three 3 mm fingers 15 mm wide with 3.2 mm gaps, 5.2 mm M5 hole, 25 mm base with a captive 1/4-20 nut.
It works with any GoPro that has folding fingers (Hero 8 and later), but not with older frames that need the quick-release buckle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Dust extraction adapter, 35 mm tool port to 58 mm hoseA tapered adapter that connects the small 35 mm dust port on a sander or router to the 58 mm hose of a shop vacuum, so chips end up in the bin instead of on…Rokform RokLock to MagSafe ring adapter discA disc that twists into a Rokform RokLock mount and presents a MagSafe magnet ring on its face, so an iPhone 16 or any MagSafe phone without a Rokform case c…Raspberry Pi 5 VESA 100 mount adapter plateA plate that hangs a Raspberry Pi 5 on the back of a monitor using the 100 x 100 mm VESA holes, turning a screen into a compact desktop or kiosk.Shower caddy hook adapter for a 19 mm shower railAn adapter that lets an over-the-showerhead caddy from Simplehuman, OXO or IKEA hang from the vertical riser rail instead, when the shower head is too low or…Wahoo ELEMNT ACE to Garmin quarter-turn adapterAn adapter that puts an ELEMNT ACE on a Garmin quarter-turn mount, 4 mm thick with the ACE 4-hole pattern on top.Creality CFS cardboard spool rim ringsRim rings that clip over the flanges of a 200 mm cardboard spool so it turns cleanly on the rollers of a Creality CFS instead of slipping and leaving dust.