1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Fidlock TWIST bottle-base spacer
This is not a fixed STL. SpeakCAD generates the fidlock twist bottle-base spacer to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a fidlock twist bottle-base spacer is
A 8 mm spacer that sits under a Fidlock TWIST base so a 590 ml bottle clears a down-tube boss or shock. The plate is 70 × 30 × 8 mm with the official 4-hole pattern. Print in PETG with 2 mm walls.
The stock base sits the bottle on the shock. Tell SpeakCAD 590 vs 800, preview the spacer in the browser without paying, then download the STL.
Example prompt
Model a Fidlock TWIST base spacer 70×30×8 mm with the official 4-hole pattern, 2 mm PETG.
People also search
fidlock twist spacer stlfidlock bottle riser 3d printtwist base spacerfidlock clearance shim 3d model
Questions people ask about a fidlock twist bottle-base spacer
A 8 mm spacer that sits under a Fidlock TWIST base so a 590 ml bottle clears a down-tube boss or shock. The plate is 70 × 30 × 8 mm with the official 4-hole pattern. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Fidlock TWIST base spacer 70×30×8 mm with the official 4-hole pattern, 2 mm PETG.
The stock base sits the bottle on the shock. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
PVC pipe adapter, 40 mm to 50 mmA reducing coupler that connects a 40 mm PVC pipe to a 50 mm pipe for low-pressure drains, dust collection or a garden gravity feed.Quad Lock to Peak Design SlimLink adapter plateAn adapter puck with a Quad Lock style four-lug pattern on one face and a Peak Design SlimLink style square boss on the other, so a phone in a Peak Design Ev…Bryton Rider to Garmin quarter-turn mount adapterBryton Rider 750, S500 and S800 computers use a quarter-turn foot that is close to Garmin's but not identical, so on many Garmin out-front mounts the unit fe…Raspberry Pi 5 USB-C power cable strain relief bootA snap-on boot that supports the USB-C plug of the official Raspberry Pi 27 W power supply where it meets the Pi 5, preventing the wiggle that causes undervo…Shure SM7B to 3/8 inch mic arm adapterA threaded adapter that lets a Shure SM7B or SM7dB yoke, which has a 5/8-27 female thread, screw onto a boom arm that only offers a 3/8-16 male stud, such as…SwitchBot Blind Tilt rod adapter 6 mmAn adapter that lets a SwitchBot Blind Tilt drive a 6 mm square tilt rod instead of the 7 mm it shipped for.