1
Replacement parts
Elegoo Centauri Carbon top PTFE guide
This is not a fixed STL. SpeakCAD generates the elegoo centauri carbon top ptfe guide to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a top PTFE guide clip for an Elegoo Centauri Carbon lid, 4.5 mm clip slot, PC4-M10 threaded hole, 60 mm bend radius channel.
What a elegoo centauri carbon top ptfe guide is
A guide that lets you feed filament through the top of an Elegoo Centauri Carbon from a spool placed on the lid or on a stand beside it, with a smooth bend so the filament does not rub the glass. It clips on the lid edge with a 4.5 mm slot, has a PC4-M10 threaded hole for a 4 mm PTFE tube and a 60 mm bend radius channel. Print in PETG, on its side.
The CC ships with a rear spool holder, so this guide is for top-mount setups only. Open the model in SpeakCAD for free, change the lid slot in the viewer or the chat, then download the STL.
People also search
centauri carbon ptfe guide stlcentauri carbon top spoolelegoo centauri filament guidecentauri carbon ptfe clip 3d print
Questions people ask about a elegoo centauri carbon top ptfe guide
A guide that lets you feed filament through the top of an Elegoo Centauri Carbon from a spool placed on the lid or on a stand beside it, with a smooth bend so the filament does not rub the glass. It clips on the lid edge with a 4.5 mm slot, has a PC4-M10 threaded hole for a 4 mm PTFE tube and a 60 mm bend radius channel. Print in PETG, on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a top PTFE guide clip for an Elegoo Centauri Carbon lid, 4.5 mm clip slot, PC4-M10 threaded hole, 60 mm bend radius channel.
The CC ships with a rear spool holder, so this guide is for top-mount setups only. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Osprey backpack sternum strap buckle replacementThe sliding sternum strap buckle on Osprey Talon, Stratos and Atmos packs (and similar Deuter and Gregory ones) rides along a webbing rail and cracks after a…IKEA BESTÅ glass-door soft bumpA 8 mm silicone-style bump that sticks on a BESTÅ glass door so it does not slap the frame.IKEA EKET wall-mount cover capA cap that hides the EKET wall-rail screws (about 12 mm heads) so a hanging cube looks finished.Anycubic Kobra S1 lid riserFour corner spacers that hold the top lid of an Anycubic Kobra S1 about 20 mm open, venting the chamber for PLA and letting a PTFE tube pass.Neff TwistPad knob housingA replacement body for the magnetic TwistPad control knob of Neff induction hobs, about 45 mm across and 15 mm tall.M8 furniture leveller foot cap for 30 mm padsA push-on cap for the swivel pad of M8 furniture levellers, the adjustable feet under kitchen units, wardrobes, washing machines and table legs, whose 30 mm…