1
Hobby & gaming
DJI Avata 2 display stand
This is not a fixed STL. SpeakCAD generates the dji avata 2 display stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a display stand for a DJI Avata 2, 200×150×6 mm base, four 12 mm posts under the prop guards, centre cradle with 1 mm clearance.
What a dji avata 2 display stand is
A shelf stand that shows off a DJI Avata 2 (185 × 212 × 64 mm) and keeps weight off its landing pads. The base is 200 × 150 × 6 mm with four 12 mm posts that sit under the prop guards, a centre cradle with 1 mm clearance under the battery, and a slot for the battery cable. Print flat in PLA or PETG.
The first Avata is smaller and squarer (180 × 180 × 80 mm), so the posts miss its ducts. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
dji avata 2 stand stlavata 2 display stand 3d printavata 2 accessories 3d printfpv drone display stand
Questions people ask about a dji avata 2 display stand
A shelf stand that shows off a DJI Avata 2 (185 × 212 × 64 mm) and keeps weight off its landing pads. The base is 200 × 150 × 6 mm with four 12 mm posts that sit under the prop guards, a centre cradle with 1 mm clearance under the battery, and a slot for the battery cable. Print flat in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a display stand for a DJI Avata 2, 200×150×6 mm base, four 12 mm posts under the prop guards, centre cradle with 1 mm clearance.
The first Avata is smaller and squarer (180 × 180 × 80 mm), so the posts miss its ducts. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Three-tier controller desk standA stepped desk stand for three controllers of any brand, with 170 mm wide shelves 60 mm deep that rise 45 mm each, a 10 mm front lip and a rear slot on every…Hexagonal dice vault with lidA dice vault stores a full seven-piece polyhedral set in a compact hex body with a friction-fit or threaded lid.Nintendo Switch game cartridge case for 24 cardsA slim two-part case with a sliding lid that holds 24 Nintendo Switch game cards in a 6 by 4 grid.Hot Wheels wall display rack for carded carsA wall rack for unopened Hot Wheels and Matchbox mainlines still on their blister cards, which measure 108 x 165 mm with the blister sticking out about 35 mm.DualSense Edge back-paddle restA rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.Nintendo Switch 2 Pro Controller standA stand that parks a Switch 2 Pro Controller (about 160 × 110 × 60 mm) at 20 degrees with a 14 mm USB-C slot so it charges on a shelf.