1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Cannondale Scalpel bottle-cage spacer
This is not a fixed STL. SpeakCAD generates the cannondale scalpel bottle-cage spacer to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a cannondale scalpel bottle-cage spacer is
A spacer that lifts a bottle cage 12 mm off a Scalpel down tube so a 750 ml bottle clears the shock. The plate is 70 × 20 × 12 mm with two 5 mm holes on 64 mm centres. Print in PETG with 2 mm walls.
The Levo SL cage adapter is a different bike. Describe bottle size in SpeakCAD, preview the spacer in the browser without paying, then download the STL.
Example prompt
Model a Scalpel bottle-cage spacer 70×20×12 mm, two 5 mm holes on 64 mm centres, 2 mm PETG.
People also search
scalpel cage spacer stlcannondale scalpel bottle mount 3d printscalpel shock clearance spacerscalpel cage riser 3d model
Questions people ask about a cannondale scalpel bottle-cage spacer
A spacer that lifts a bottle cage 12 mm off a Scalpel down tube so a 750 ml bottle clears the shock. The plate is 70 × 20 × 12 mm with two 5 mm holes on 64 mm centres. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Scalpel bottle-cage spacer 70×20×12 mm, two 5 mm holes on 64 mm centres, 2 mm PETG.
The Levo SL cage adapter is a different bike. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Cup holder phone mount with gooseneck baseA cup holder phone mount avoids sticky dash pads and suction cups by wedging into a cup holder with an expanding base.Snap cable wrap for charging cablesCharging cables knot in a bag unless something holds the coil, and a rigid wrap works better than a velcro strap that sheds fluff.Garage parking stop wheel chock for Tesla Model YA low parking stop that screws to the garage floor so the front wheel of a Tesla Model Y or any similar SUV settles into the same spot every time, leaving ro…Bugaboo Butterfly phone mountA phone mount that clamps a 70–85 mm phone onto a Butterfly handle, 18 mm snap and a 12 mm lip.RTL-SDR V4 dipole-arm clipA clip that holds RTL-SDR V4 dipole arms at 90 degrees on a window, 8 mm snap.Toyota RAV4 Prime charge-cable hookA hook that hangs a RAV4 Prime J1772 cable on a garage wall so it is not on the floor.