Adapters & couplers

Bryton Rider to Garmin quarter-turn mount adapter

Bryton Rider 750, S500 and S800 computers use a quarter-turn foot that is close to Garmin's but not identical, so on many Garmin out-front mounts the unit feels loose or will not turn fully. This adapter has a Bryton-shaped female socket on top and a male Garmin four-tab interface underneath, each cut with 0.2 mm clearance from measured tabs, in a 10 mm thick puck 40 mm across. It prints socket-up in PETG, and the tab edges get a 0.5 mm chamfer so the computer engages smoothly.

Because the socket is generated from the exact tab widths of your Bryton rather than an approximation, the head unit clicks home without play and stays put over cobbles. Describe both interfaces in SpeakCAD, preview the puck free in the browser, adjust tab thickness in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a bike computer adapter puck 40 mm in diameter and 10 mm thick with a female quarter-turn socket on top for a Bryton foot, a male Garmin four-tab quarter-turn interface underneath, 0.2 mm clearance and 0.5 mm chamfers on all tab edges.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More adapters & couplers

Peak Design Capture clip backing plate for thin strapsA spacer plate that sits behind a Peak Design Capture V3 clip so it clamps firmly onto thin backpack straps, seatbelt-style webbing or a 20 mm MOLLE row that…PVC pipe adapter, 40 mm to 50 mmA reducing coupler that connects a 40 mm PVC pipe to a 50 mm pipe for low-pressure drains, dust collection or a garden gravity feed.Rigid shaft coupler, 5 mm to 8 mmA rigid coupling that joins a 5 mm motor shaft to an 8 mm lead screw or output shaft in low-torque projects such as small linear stages or slow turntables.MagSafe charger puck to 1/4-20 tripod mount adapterA holder that turns an Apple MagSafe charger puck (56 mm diameter, about 5.5 mm thick) into a magnetic tripod head, so an iPhone 16 Pro snaps onto any tripod…Hydro Flask 21 oz bottle cage holder for bikeA cage that holds an insulated Hydro Flask 21 oz or 24 oz standard mouth bottle (73 mm diameter) on a bike, keeping coffee hot or water cold on a commute or…Shop-Vac 2.5 inch hose to 35 mm tool dust adapterA stepped reducer that joins a Shop-Vac, Craftsman or Ridgid 2.5 inch (63.5 mm OD) hose end to the 35 mm dust port found on most European sanders and track s…

Make your bryton rider to garmin quarter-turn mount adapter now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.