1
Replacement parts
Bosch washing machine programme knob
This is not a fixed STL. SpeakCAD generates the bosch washing machine programme knob to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Bosch washing machine programme knob, 55 mm diameter 25 mm deep, 6.1 mm D-bore 15 mm deep, pointer ridge, PETG.
What a bosch washing machine programme knob is
A replacement programme selector knob for Bosch Serie 4 and Serie 6 washing machines, about 55 mm across and 25 mm deep. The bore matches the selector shaft with a 6.1 mm D profile, 15 mm deep, and a pointer ridge lines up with the printed programmes. Print in PETG or ASA face down.
Siemens iQ machines look similar but some use a different shaft, so check the flat. Open the ready-made knob free in SpeakCAD, change the bore in the chat or the viewer, then download the STL.
People also search
bosch washing machine knobbosch washer programme knob replacementbosch washing machine dial 3d printbosch serie 4 knob stl
Questions people ask about a bosch washing machine programme knob
A replacement programme selector knob for Bosch Serie 4 and Serie 6 washing machines, about 55 mm across and 25 mm deep. The bore matches the selector shaft with a 6.1 mm D profile, 15 mm deep, and a pointer ridge lines up with the printed programmes. Print in PETG or ASA face down.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Bosch washing machine programme knob, 55 mm diameter 25 mm deep, 6.1 mm D-bore 15 mm deep, pointer ridge, PETG.
Siemens iQ machines look similar but some use a different shaft, so check the flat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA BESTÅ 30 mm leg riserA 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit.Bambu Lab P1S glass door handleA replacement handle for the front glass door of a P1S, for when the stock one cracks or peels off.Whirlpool dishwasher lower rack wheelA lower rack wheel for Whirlpool, KitchenAid and Maytag dishwashers in the style of part W10195416, about 32 mm across with a snap hub that clips onto the rack.Bialetti Moka Express 3-cup handleA replacement handle for the 3-cup Bialetti Moka Express, about 70 mm long, that fixes to the boss on the upper chamber with the original screw.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.