1
Replacement parts
Bosch dishwasher folding tine clip
This is not a fixed STL. SpeakCAD generates the bosch dishwasher folding tine clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Bosch dishwasher folding tine clip, 12 mm wide, two 3.2 mm snap channels for the tine and frame wires, 1.6 mm arms, PETG.
What a bosch dishwasher folding tine clip is
A clip that holds a folding tine row of a Bosch or Siemens dishwasher basket in the up position, the part that snaps off after years of hot cycles. It hooks the tine row wire with a 3.2 mm C-channel and locks onto the basket frame wire with a second 3.2 mm snap, 12 mm wide with 1.6 mm arms. Print on its side in PETG so the layers run along the arms.
Whirlpool and Miele racks use thicker wire and a different pivot, so this clip will not grip them. Open it in SpeakCAD for free, set your wire diameter in the chat or the viewer, then download the STL.
People also search
bosch dishwasher tine clipdishwasher folding tines clip replacementsiemens dishwasher prong clip 3d printbosch dishwasher rack clip stl
Questions people ask about a bosch dishwasher folding tine clip
A clip that holds a folding tine row of a Bosch or Siemens dishwasher basket in the up position, the part that snaps off after years of hot cycles. It hooks the tine row wire with a 3.2 mm C-channel and locks onto the basket frame wire with a second 3.2 mm snap, 12 mm wide with 1.6 mm arms. Print on its side in PETG so the layers run along the arms.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Bosch dishwasher folding tine clip, 12 mm wide, two 3.2 mm snap channels for the tine and frame wires, 1.6 mm arms, PETG.
Whirlpool and Miele racks use thicker wire and a different pivot, so this clip will not grip them. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Whirlpool dishwasher tine row pivot clipA pivot clip for the folding tine rows in Whirlpool and KitchenAid lower racks, which lets the row fold flat and stay on the rack.Bialetti Moka Express 3-cup handleA replacement handle for the 3-cup Bialetti Moka Express, about 70 mm long, that fixes to the boss on the upper chamber with the original screw.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.IKEA PAX KOMPLEMENT 5 mm shelf pinA 5 mm shelf pin that replaces a lost KOMPLEMENT pin in a PAX frame so a 50 or 75 cm shelf sits level.Bambu Lab A1 purge waste binA catch bin for the purge chute of a full-size A1 (385 × 410 × 458 mm), so AMS lite colour changes land in a 1.2 litre box instead of on the desk.