Tent ceiling lantern hook for Black Diamond Moji
A double-ended hook that hangs a Black Diamond Moji, Goal Zero Crush Light or any small lantern from the fabric loop in a tent ceiling, low enough to read by without dangling in your face. One end is a 12 mm wide open hook for the tent's webbing loop, the other a closed 20 mm ring the lantern's own hanger clips into, joined by a 40 mm shaft with a 4 mm profile. Print it on its side in PETG or TPU; the whole thing weighs under 5 g and takes only the lantern's 120 g load.
Tent loops vary from thin cord on a Nemo Hornet to 20 mm webbing on a Coleman family tent, so a fixed downloaded hook is often too narrow to fit. Describe your loop and lantern hanger in SpeakCAD, preview the hook free in the browser, change the length in the chat, then download the STL.
Create a lantern hanging hook 70 mm long with a 4 mm square profile, an open hook at the top with a 12 mm wide, 8 mm deep throat, a closed 20 mm inner diameter ring at the bottom and 1 mm rounded edges, oriented to print flat on one side.