1
Garden & outdoor
AHT20 Stevens screen radiation shield
This is not a fixed STL. SpeakCAD generates the aht20 stevens screen radiation shield to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Stevens screen, eight 120 mm louvred plates 12 mm tall with 45 degree skirts, three 4 mm rod holes, 30×20 mm sensor bay, 25 mm pipe clamp, ASA.
What a aht20 stevens screen radiation shield is
A stacked Stevens screen that shades an AHT20 or SHT31 breakout from sun and rain so outdoor readings do not jump 5 °C at noon. Eight 120 mm louvred plates stack on three 4 mm threaded rods, each plate is 12 mm tall with a 45 degree skirt, the sensor bay is 30 × 20 mm, and a 25 mm pipe clamp mounts it. Print in white ASA or PETG, 1.6 mm walls.
A plain vented box heats up in direct sun. Open the model in SpeakCAD without paying, change the plate count in the chat or the viewer, then download the STL.
People also search
stevens screen stlradiation shield 3d printweather station sensor shieldaht20 outdoor housing 3d model
Questions people ask about a aht20 stevens screen radiation shield
A stacked Stevens screen that shades an AHT20 or SHT31 breakout from sun and rain so outdoor readings do not jump 5 °C at noon. Eight 120 mm louvred plates stack on three 4 mm threaded rods, each plate is 12 mm tall with a 45 degree skirt, the sensor bay is 30 × 20 mm, and a 25 mm pipe clamp mounts it. Print in white ASA or PETG, 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Stevens screen, eight 120 mm louvred plates 12 mm tall with 45 degree skirts, three 4 mm rod holes, 30×20 mm sensor bay, 25 mm pipe clamp, ASA.
A plain vented box heats up in direct sun. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Garden tool handle clips for shed railRakes, hoes and spades lean in a corner until a clip system holds them upright by the handle.Rain gauge with fence bracketKnowing how much rain fell overnight tells you whether to water, and a printed rain gauge costs less than a coffee.Tent guy line tensioner for 3 mm reflective cordA three-hole line tensioner for the 2 to 3 mm reflective guy cord used on MSR, Big Agnes, Nemo and Decathlon Quechua tents, replacing the sliders that snap i…Trek Rail Bosch charger holsterA garage holster that parks a Bosch 4A charger and the Rail's charge-port cap on a 4.5 mm hole pair.Garmin Edge 1050 out-front mount 31.8 mmAn out-front mount for an Edge 1050 on a 31.8 mm bar with the quarter-turn head and a 20 mm GoPro boss underneath.Jetboil Flash 2.0 pot-support ringA ring that lets a Flash 2.0 hold a non-Jetboil 1 L pot, 110 mm ID with three 8 mm tabs.