Open an STL or 3MF in 3D, right in your browser
Drop an STL or 3MF to view it
Up to 50 MB. It opens in 3D right here, with its size and a print check. The file stays in your browser.
Drop it, read it, then edit, slice or convert it
The viewer answers the questions to ask before a print: how big the part is, whether the mesh is whole, and how much of it hangs in the air.Turn it and read its size
Drag to turn the model, pinch or scroll to zoom. Under the view: width × depth × height in millimetres, the volume in cm³ and the number of triangles.Read the print check
Closed mesh: yes, or the openings and loose edges found, with the size of the largest. Supports: the area that hangs in the air as the part lies, and whether laying it on another face would need clearly less.Edit, slice or convert
Edit or fix it opens the same file in the SpeakCAD editor; Slice it turns it into G-code for one of 380+ printers; Download as 3MF (or STL) converts it on the spot, with no account.What the viewer shows
| Line | What it tells you |
|---|---|
| Size | The model's box in millimetres, width × depth × height: check it against your printer's bed before anything else. |
| Volume | The solid's volume in cm³; multiplied by your filament's density, the weight of a part printed solid. |
| Triangles | How finely the surface is cut. A few thousand for a bracket, hundreds of thousands or more for a scan or a sculpture. |
| Closed mesh | Yes, or the openings and loose edges found. An open mesh can slice with missing walls, and it cannot be cut or added to as it is. |
| Supports | The downward area that would need supports as the part lies, and whether another face down would need clearly less. |
| Files | STL (binary and ASCII) and 3MF, up to 50 MB. Out: the other of the two. |
| Account | None to view, check or convert. Edit and Slice need a free one, no card. |
What runs where
Viewing, the check and the conversion are done by the page itself, in your browser: the file is read from your disk into the tab, drawn with WebGL and measured there. Nothing is sent anywhere, which is why there is no account to make and no size quota beyond the 50 MB a browser tab handles comfortably.
The two doors are different. Edit or fix it hands the file to the Edit an STL box: leave the change empty to open it as a model you drill, cut and add to by hand, or type the change for the AI. Slice it hands it to the online slicer box, where you pick your printer. Edit and Slice need a free account, no card. When you continue from either one, the file goes to private storage, kept 24 hours at most, so it is waiting for you after sign-up.
Reading the print check
- Closed mesh. A printable mesh is a closed skin with no holes in it. "No" means the check found openings (a missing triangle, a cap left off a cylinder) or loose edges (a ragged region where triangles do not meet edge to edge). Slicers often print such a file anyway, but a missing wall can come out as a gap in the print. The viewer changes nothing in the file. When the SpeakCAD editor builds on an uploaded mesh, it first closes its small gaps (gaps up to 15 percent of the part's longest side, never under 3 mm or over 30 mm); larger openings stay open, and a part that needs them closed is best rebuilt, by asking the AI for a parametric rebuild of the same size.
- Supports. Downward faces within about 40 degrees of horizontal that do not rest on the bed need supports in most slicer profiles. The line gives their area as the part lies in the file, the way your slicer will place it unless you turn it; short horizontal spans count half, as they usually bridge. When laying the part on another face would need clearly less support, the line says so: turn it in your slicer before printing.
- What it does not measure. Wall thickness, small holes and fits are not checked here. In the editor, the Measure tool reads distances and wall thickness on the part.
On a phone
The viewer works in Safari on an iPhone or iPad and in Chrome on Android. Pick the file from Files or Downloads, turn it with one finger and zoom with two. It is a quick way to look at a file someone sent you, and to check its size, before you print it.
STL or 3MF?
An STL is a list of triangles with no unit, no colour and no structure. A 3MF is a zipped package that says its unit, can hold several objects, colours and, from a slicer, the plates and print settings. Both print the same geometry. STL to 3MF and 3MF to STL convert one into the other in the browser, and the rest of the free tools are on one page.
Questions
Yes, in full. Opening a file, turning it in 3D, the size, volume and print check and the conversion between STL and 3MF need no account and no payment, and the file stays in your browser. With a free account, shaping the file by hand in the SpeakCAD editor is free too, download included, and slicing it is free up to 10 files a day; changes made by the AI spend credits.
Not to view it, check it or convert it: the file is read and written by JavaScript in your browser tab, and closing the tab is the end of it. Only Edit or Slice send it on, and only when you continue from them. Edit and Slice need a free account, no card. When you continue from either one, the file goes to private storage, kept 24 hours at most, so it is waiting for you after sign-up.
No, STL and 3MF only, in and out. SpeakCAD reads and writes no STEP file: export an STL or a 3MF from your CAD program first. An OBJ opens in most slicers and in Blender, which can save it as STL.
Yes, in Safari or Chrome. Tap Choose a file and pick the STL or 3MF from Files or Downloads; turn the model with one finger and zoom with two. A converted file goes back to Files or Downloads: on a phone the button turns into Save once the file is ready, and a second tap saves it.
An STL has no unit: the numbers in it are read as millimetres, which is what almost every program exports. A model exported in inches shows 25.4 times too small, one in metres 1,000 times too small. Check the Size line; your slicer can scale the part by 2540 percent (or 100,000 percent) before you print it. A 3MF says its unit, and the viewer converts it to millimetres.
The viewer only reports. When the SpeakCAD editor builds on an uploaded mesh (a hole, a cut, an added tab), it first closes its small gaps (gaps up to 15 percent of the part's longest side, never under 3 mm or over 30 mm); larger openings stay open. For a part with large openings, the AI can rebuild it as a clean parametric model of the same size: one AI request, in credits.
Up to 50 MB. A larger STL is usually a scan or a very fine export: lower its resolution in the program that made it, or save it as a 3MF, which is smaller for the same triangles.