STL to 3MF converter

Convert an STL to 3MF in your browser

Drop an STL and download it as a 3MF a few seconds later. It runs in your browser: the file is not uploaded and no account is asked for. The 3MF is in millimetres, writes each shared corner once and is zipped, so it is usually smaller than the STL, and each separate body becomes its own object, ready to place, colour or set on its own in Bambu Studio, OrcaSlicer or PrusaSlicer.

Drop an STL to convert it to 3MF

Up to 50 MB. Converted in your browser, with no account: the file is not uploaded.

How it works

From STL to 3MF in three steps

No settings to choose: an STL holds only triangles, and the 3MF carries all of them.
1

Drop the STL

Binary or ASCII, up to 50 MB, from a computer or from Files on a phone. It opens in 3D with its size, so you see it is the right file.
2

Check it

The size in millimetres, the volume, whether the mesh is closed and whether it needs supports as it lies: the same check as the STL viewer.
3

Download the 3MF

Download 3MF writes the file with the STL's name. On a phone the button turns into Save once the file is ready: a second tap saves it to Files or Downloads.
4

Open it in your slicer

Bambu Studio, OrcaSlicer and PrusaSlicer open it as a project of one or more objects. Or press Slice it to get G-code from the SpeakCAD online slicer, with a free account.

What the 3MF holds

In the 3MF
GeometryEvery triangle of the STL, where the STL puts it.
UnitMillimetres, written in the file: the STL's numbers are read as millimetres, as almost every program exports them.
ObjectsOne per separate body. Bodies that touch stay one object made of parts; a file of more than 500 bodies (a scan, loose debris) stays one object.
Colours, plates, print settingsNone: the STL has none to carry. Set them in your slicer and save the project there.
SizeUsually smaller than a binary STL and much smaller than an ASCII one: corners shared by several triangles are written once and the package is zipped.
Account, uploadNone: the conversion runs in your browser.

Why convert an STL to 3MF

  • The unit travels with the file. An STL is only numbers; every program assumes they are millimetres. A 3MF says so, and a slicer reading it has nothing to guess.
  • Several objects instead of one. A plate of five parts saved as one STL arrives as one object you cannot arrange or colour part by part. As a 3MF, each separate body is its own object.
  • Smaller files. A binary STL spends 50 bytes on every triangle, with each corner repeated in every triangle that uses it. The 3MF lists each corner once and zips the whole, which usually makes it smaller, and an ASCII STL many times larger than either.
  • The format the slicers save. Bambu Studio, OrcaSlicer and PrusaSlicer save their projects as 3MF; MakerWorld and Printables offer 3MF downloads with the print settings in them. A 3MF from this page holds geometry only, and your slicer adds the rest when you save the project.

What the converter does not do

It does not repair the mesh: the triangles in the 3MF are the STL's, and the check under the view says whether they close. It does not add print settings, plates or filaments. And it reads only STL and 3MF: SpeakCAD has no STEP, OBJ or other importer.

Going the other way

3MF to STL turns a 3MF, a slicer project included, back into one STL. The STL viewer opens either format without converting it.

Questions

Yes, with no account and no limit on the number of files, each up to 50 MB. The conversion runs in your browser, so there is nothing to pay for on our side.

Not to view it, check it or convert it: the file is read and written by JavaScript in your browser tab, and closing the tab is the end of it. Only Edit or Slice send it on, and only when you continue from them. Edit and Slice need a free account, no card. When you continue from either one, the file goes to private storage, kept 24 hours at most, so it is waiting for you after sign-up.

Yes: the file follows the 3MF core specification in millimetres, which all three read. Each separate body arrives as its own object, so you can move, colour or set it alone; bodies that touch arrive as the parts of one object.

Because it held several separate bodies: pieces that share no corner, such as the parts of a plate exported together. Each becomes its own object so your slicer can place them one by one. Pieces that touch stay together as one object.

There are none to keep: an STL has no colour. Pick a filament for each object in your slicer, then save the project, which writes the colours into its own 3MF.

No, STL and 3MF only, in and out. SpeakCAD reads and writes no STEP file: export an STL or a 3MF from your CAD program first. An OBJ opens in most slicers and in Blender, which can save it as STL.

Yes, in Safari or Chrome. Tap Choose a file and pick the STL or 3MF from Files or Downloads; turn the model with one finger and zoom with two. A converted file goes back to Files or Downloads: on a phone the button turns into Save once the file is ready, and a second tap saves it.

The file needs a change, not just a new format?

Open it in the editor: a hole, a cut, text or rounded corners by hand are free, download included. Or describe the change to the AI.