Free file tools

Free tools for the files you print

View an STL or 3MF in 3D with a print check, convert it between STL and 3MF, estimate its print time and cost, slice it for your printer. The viewer and the converters run in your browser with no account, and the file is not uploaded; the calculators and the slicer run the real OrcaSlicer engine on our servers.

The tools

STL viewer

Open an STL or 3MF in 3D in the browser: its size in millimetres, volume, triangles, whether the mesh is closed and whether it needs supports as it lies.No account, nothing uploadedOpen STL viewer

STL to 3MF

Convert an STL to a 3MF in millimetres, each separate body its own object, zipped and usually smaller.No account, nothing uploadedOpen STL to 3MF

3MF to STL

Convert a 3MF, a Bambu Studio, OrcaSlicer or PrusaSlicer project included, to one binary STL with every object where the file places it.No account, nothing uploadedOpen 3MF to STL

3D print cost calculator

Print time, filament and cost of your STL or 3MF, sliced by OrcaSlicer with your printer's own profile.No account, up to 10 estimates a dayOpen 3D print cost calculator

3D print time calculator

How long your file takes to print on your printer, from a real slice rather than a rule of thumb.No account, up to 10 estimates a dayOpen 3D print time calculator

STL to G-code

Your STL or 3MF sliced into G-code for one of 380+ printers, in the browser.Free account, up to 10 files a dayOpen STL to G-code

Edit an STL

Add a hole, a cut, text or rounded corners to a downloaded model by hand, or describe the change to the AI.Free account: by hand free, download included; AI changes in creditsOpen Edit an STL

In your browser, or on our servers

The STL viewer, STL to 3MF and 3MF to STL read and write the file inside your browser tab: no upload, no account, no daily limit. The print cost and print time calculators and the online slicer send the file to OrcaSlicer running on our servers, because a real slice with your printer's profile is the only honest estimate; the calculators need no account (10 estimates a day), the slicer a free one (up to 10 files a day).

Files

STL (binary and ASCII) and 3MF, up to 50 MB, in and out; G-code out of the slicer. SpeakCAD has no STEP, OBJ or other importer: export an STL or a 3MF from your CAD program first.

When the file itself is wrong

The tools here look at a file, convert it and slice it; none of them changes its shape. To add a missing hole, cut a slot, write a label or round the corners of a downloaded model, open it in the editor: by hand it is free, download included, or describe the change to the AI.

Questions

Yes. The viewer and the two converters need no account and run in your browser. The print time and cost calculators need no account, up to 10 estimates a day. The online slicer is free with a free account, no card, up to 10 files a day. Changing a file by hand in the editor is free, download included; changes made by the AI spend credits.

STL and 3MF in, up to 50 MB; STL, 3MF and G-code out. Not STEP, OBJ or other formats: SpeakCAD reads and writes none of them.

Not to view it, check it or convert it: the file is read and written by JavaScript in your browser tab, and closing the tab is the end of it. Only Edit or Slice send it on, and only when you continue from them. Edit and Slice need a free account, no card. When you continue from either one, the file goes to private storage, kept 24 hours at most, so it is waiting for you after sign-up.

A file that needs a change?

Open it in the editor: a hole, a cut, text or rounded corners by hand are free, download included. Or describe the change to the AI.