1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Wahoo ELEMNT ACE to Garmin quarter-turn adapter
This is not a fixed STL. SpeakCAD generates the wahoo elemnt ace to garmin quarter-turn adapter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a wahoo elemnt ace to garmin quarter-turn adapter is
An adapter that puts an ELEMNT ACE on a Garmin quarter-turn mount, 4 mm thick with the ACE 4-hole pattern on top. Print in PETG.
You should not buy a second mount. Tell SpeakCAD ACE vs Roam, preview the adapter in the browser at no cost, then download the STL.
Example prompt
Design an ACE to Garmin quarter-turn adapter 4 mm thick, ACE 4-hole top, Garmin twist bottom, 2 mm PETG.
People also search
wahoo ace garmin adapter stlelemnt ace quarter turn 3d printwahoo ace mount adapterace to garmin mount 3d model
Questions people ask about a wahoo elemnt ace to garmin quarter-turn adapter
An adapter that puts an ELEMNT ACE on a Garmin quarter-turn mount, 4 mm thick with the ACE 4-hole pattern on top. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an ACE to Garmin quarter-turn adapter 4 mm thick, ACE 4-hole top, Garmin twist bottom, 2 mm PETG.
You should not buy a second mount. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Canon EOS R6 hot shoe dual cold shoe barA T-shaped bar that slides into the hot shoe of a Canon EOS R6, R6 Mark II or R50 and offers two cold shoes side by side, so a Rode VideoMic GO II and a smal…Peak Design Travel Tripod phone clampA clamp that puts a 70–85 mm phone on a Travel Tripod's cold shoe, 12 mm shoe and a 1/4-20 backup.Microphone stand thread adapter, 3/8 to 5/8 inchA threaded bushing that lets a European 3/8 inch microphone stand accept a US 5/8 inch 27 TPI clip or shock mount.Filament spool hub adapter for 52 mm boresA pair of hub inserts that centre a filament spool with a large 52 mm bore on a slim holder rod so it turns smoothly instead of wobbling and tangling.Bontrager Blendr to GoPro mount adapterTrek bikes ship with Bontrager Blendr stem and bar bases that accept only Blendr accessories.Raspberry Pi Camera Module 3 GoPro mount adapterAn adapter that puts a Raspberry Pi Camera Module 3 on any GoPro-style mount, giving access to hundreds of clamps, suction cups and helmet mounts.