1
Hobby & gaming
PS5 detachable disc drive storage sleeve
This is not a fixed STL. SpeakCAD generates the ps5 detachable disc drive storage sleeve to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a PS5 disc drive sleeve, 187×147×22 mm pocket open on one short side, 15 mm finger notch, connector bump, 2 mm walls.
What a ps5 detachable disc drive storage sleeve is
A dust sleeve for the detachable Ultra HD Blu-ray drive sold for the PS5 Slim, Digital Edition and PS5 Pro (the drive is about 185 × 145 × 20 mm, measure yours first). The pocket is 2 mm larger each way, open on one short side, with a 15 mm finger notch, a raised bump to hold the connector end off the shelf and 2 mm walls. Print standing on its closed edge in PLA.
The launch PS5 had a built-in drive, so this is only for the separate drive. Open the ready-made sleeve in SpeakCAD for free, change the pocket size in the viewer or the chat, then download the STL.
People also search
ps5 disc drive holder stlps5 slim disc drive storageps5 pro disc drive case 3d printps5 detachable drive cover
Questions people ask about a ps5 detachable disc drive storage sleeve
A dust sleeve for the detachable Ultra HD Blu-ray drive sold for the PS5 Slim, Digital Edition and PS5 Pro (the drive is about 185 × 145 × 20 mm, measure yours first). The pocket is 2 mm larger each way, open on one short side, with a 15 mm finger notch, a raised bump to hold the connector end off the shelf and 2 mm walls. Print standing on its closed edge in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a PS5 disc drive sleeve, 187×147×22 mm pocket open on one short side, 15 mm finger notch, connector bump, 2 mm walls.
The launch PS5 had a built-in drive, so this is only for the separate drive. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Guitar wall hanger with padded yokeA wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.Pokémon TCG toploader wall display rackA wall rack that shows twelve Pokémon TCG cards in standard 3 x 4 inch toploaders (76 x 102 mm, about 2 mm thick for a 35 pt sleeve) in three rows of four.DJI Neo 2 pocket launch padA 120 mm pad that gives a Neo 2 a clean launch off gravel with 8 mm lips.Leica Q3 thumb grip with Arca footA thumb grip that bolts to a Q3 (about 130 × 80 × 93 mm) with an Arca-swiss foot so the camera sits on a travel tripod without a separate plate.Xbox Series S vertical stand with cable channelA vertical stand for an Xbox Series S (275 × 151 × 63.5 mm) with a 65.5 mm wide cradle, 20 mm deep, that sits the console on its long edge with the black ven…Arturia KeyStep 37 angled feetClip-on feet that raise the back of an Arturia KeyStep 37 (about 559 × 204 × 52 mm) by 25 mm so the keys and sequencer controls tilt towards you.