1
Organizers & storage
Nikon EN-EL15c battery and SD caddy
This is not a fixed STL. SpeakCAD generates the nikon en-el15c battery and sd caddy to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a caddy for four Nikon EN-EL15c batteries, 41×21.5×40 mm pockets with finger notches, four 25×2.8 mm SD slots, 1.6 mm walls.
What a nikon en-el15c battery and sd caddy is
A caddy for four Nikon EN-EL15c batteries (about 40 × 56 × 20.5 mm each) and four SD cards (32 × 24 × 2.1 mm). Each battery pocket is 41 × 21.5 × 40 mm deep with a finger notch, the SD slots are 25 × 2.8 mm, and a 3 mm divider lets you face used batteries the other way. Walls are 1.6 mm. Print upright in PLA or PETG.
The EN-EL25 used by the Z50 and Z fc is much smaller, so it rattles in these pockets. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
en-el15c battery holder stlnikon battery case 3d printen-el15 battery and sd card holdernikon z battery organizer
Questions people ask about a nikon en-el15c battery and sd caddy
A caddy for four Nikon EN-EL15c batteries (about 40 × 56 × 20.5 mm each) and four SD cards (32 × 24 × 2.1 mm). Each battery pocket is 41 × 21.5 × 40 mm deep with a finger notch, the SD slots are 25 × 2.8 mm, and a 3 mm divider lets you face used batteries the other way. Walls are 1.6 mm. Print upright in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a caddy for four Nikon EN-EL15c batteries, 41×21.5×40 mm pockets with finger notches, four 25×2.8 mm SD slots, 1.6 mm walls.
The EN-EL25 used by the Z50 and Z fc is much smaller, so it rattles in these pockets. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
IKEA MALM bed under-bin stop clipA clip that stops MALM under-bed drawers (about 100 × 20 cm) from rolling all the way out when you pull the handle.Prusa XL PTFE tube bundle clipA clip that keeps the five 4 mm PTFE tubes of a five-toolhead Prusa XL side by side, so they do not tangle or rub on the frame when the tools swap.Pegboard claw hammer loop for 1/4 inch holesA hammer loop for standard pegboard with 1/4 inch holes on 1 inch (25.4 mm) centres.Hole saw rack, 19 to 76 mmA wall rack for bi-metal hole saws from 19 to 76 mm plus the arbor.Milwaukee Packout bit holder insert for 1/4 hex bitsA drop-in insert for the Milwaukee Packout Low-Profile Organizer that turns one of its removable bins into a dedicated 1/4 inch hex bit station.Framework Laptop 16 GPU module storage trayA padded tray that stores a Framework 16 GPU module (about 150 × 80 × 20 mm) plus two expansion cards in labelled 32 × 14 mm slots.