1
Organizers & storage
M.2 2280 SSD storage case (10 slots)
This is not a fixed STL. SpeakCAD generates the m.2 2280 ssd storage case (10 slots) to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an M.2 2280 storage case 70×60×28 mm, ten 23×4 mm slots 20 mm deep, labels, slide-on lid, PLA.
What a m.2 2280 ssd storage case (10 slots) is
A case that holds ten M.2 2280 NVMe or SATA drives (80 × 22 mm, up to 3.5 mm thick with chips on both sides) upright in labelled slots. Each slot is 23 × 4 mm and 20 mm deep, the box is 70 × 60 × 28 mm, and a slide-on lid keeps dust out. Print in PLA, slots up.
M.2 2230 and 2242 drives are shorter and drop too deep. Open the model in SpeakCAD at no cost, adjust the slot count in the viewer or the chat, then download the STL.
People also search
m.2 ssd storage case stlnvme drive holder 3d printm2 2280 organizernvme ssd box 3d model
Questions people ask about a m.2 2280 ssd storage case (10 slots)
A case that holds ten M.2 2280 NVMe or SATA drives (80 × 22 mm, up to 3.5 mm thick with chips on both sides) upright in labelled slots. Each slot is 23 × 4 mm and 20 mm deep, the box is 70 × 60 × 28 mm, and a slide-on lid keeps dust out. Print in PLA, slots up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an M.2 2280 storage case 70×60×28 mm, ten 23×4 mm slots 20 mm deep, labels, slide-on lid, PLA.
M.2 2230 and 2242 drives are shorter and drop too deep. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Milwaukee Packout crate bottle holderA holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll.Entryway catch-all tray for keys and walletA low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.Milwaukee Packout bit holder insert for 1/4 hex bitsA drop-in insert for the Milwaukee Packout Low-Profile Organizer that turns one of its removable bins into a dedicated 1/4 inch hex bit station.Whiskas and Felix cat food pouch dispenser boxA gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead…DeWalt TSTAK VI oscillating-tool insertAn insert for a TSTAK VI deep box that holds a DCS356, eight blades in 2 mm slots, and the charger.Dyson Supersonic nozzle magnetic caddyA caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger.