1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Hobby & gaming
Logitech G Pro X 2 headset hook
This is not a fixed STL. SpeakCAD generates the logitech g pro x 2 headset hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a logitech g pro x 2 headset hook is
A hook that hangs a G Pro X 2 (about 190 mm across the cups) under a desk so the boom is not on the keyboard. The saddle is 20 mm and the clamp takes a 15–32 mm desk edge with an M5 thumb screw. Print in PETG with 2 mm walls.
XM6 and XM5 hooks are a different cup width. Describe desk thickness in SpeakCAD, preview the hook in the browser at no cost, then download the STL.
Example prompt
Design a G Pro X 2 headset hook, 20 mm saddle, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG.
People also search
g pro x 2 hook stllogitech pro x 2 hanger 3d printg pro x2 headset holderlogitech g pro x 2 hook 3d model
Questions people ask about a logitech g pro x 2 headset hook
A hook that hangs a G Pro X 2 (about 190 mm across the cups) under a desk so the boom is not on the keyboard. The saddle is 20 mm and the clamp takes a 15–32 mm desk edge with an M5 thumb screw. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a G Pro X 2 headset hook, 20 mm saddle, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG.
XM6 and XM5 hooks are a different cup width. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Meta Quest 3S Elite strap wall dockA wall dock that holds a Quest 3S with the Elite battery strap hanging on a 40 mm hook and the headset sitting in a 180 mm wide cradle.DualSense Edge back-paddle restA rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.Apple Vision Pro battery-pack belt clipA clip that parks the Vision Pro battery pack on a 40 mm belt so the cable does not yank the headset, 70 × 40 mm saddle.Board game token tray with scoopsToken trays sort cardboard chits and wooden cubes into compartments with sloped scoop bottoms so you can pick pieces up with a fingertip.Guitar wall hanger with padded yokeA wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.LEGO minifigure display shelf for 24 figuresA stepped, wall-hanging shelf with four tiers of six LEGO minifigures each, every figure standing on a pair of real 4.8 mm studs at the 8 mm LEGO pitch so it…