1
Organizers & storage
Gridfinity bin for SDS-plus drill bits
This is not a fixed STL. SpeakCAD generates the gridfinity bin for sds-plus drill bits to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a 3×2 Gridfinity bin, 6 units tall, twelve 10.5 mm holes 30 mm deep on a 20 mm pitch for SDS-plus bits, size labels.
What a gridfinity bin for sds-plus drill bits is
A 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 6 units tall) for SDS-plus masonry bits, whose shanks are 10 mm across. Twelve 10.5 mm holes, 30 mm deep on a 20 mm pitch, hold bits shank-down from 5 to 16 mm, with size labels in front. Print in PETG with 4 walls.
SDS-max shanks are 18 mm and will not fit. Open the ready-made bin in SpeakCAD for free, edit the hole count in the viewer or the chat, then download the STL.
People also search
sds plus bit holdergridfinity sds bitsmasonry drill bit organizer stlsds drill bit storage 3d print
Questions people ask about a gridfinity bin for sds-plus drill bits
A 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 6 units tall) for SDS-plus masonry bits, whose shanks are 10 mm across. Twelve 10.5 mm holes, 30 mm deep on a 20 mm pitch, hold bits shank-down from 5 to 16 mm, with size labels in front. Print in PETG with 4 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a 3×2 Gridfinity bin, 6 units tall, twelve 10.5 mm holes 30 mm deep on a 20 mm pitch for SDS-plus bits, size labels.
SDS-max shanks are 18 mm and will not fit. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
iPad and iPhone family charging station rack with cable slotsA countertop rack with upright slots for two iPads and three iPhones, so the family devices charge in one place overnight.Whiskas and Felix cat food pouch dispenser boxA gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead…KitchenAid sausage-stuffer tube rackA rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry.Milwaukee Packout crate bottle holderA holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll.Handheld gaming PC shelf with three slotsA desk shelf that stands three handheld PCs upright on their bottom edge, sized for a Steam Deck OLED (49 mm deep), a Legion Go S (about 44 mm) and a ROG All…French cleat holder for a Japanese ryoba pull sawA holder for a 240 mm ryoba or kataba pull saw such as the Gyokucho Razor, whose blade is about 0.6 mm thick and 110 mm tall.