1
Garden & outdoor
Greenhouse automatic vent opener bracket
This is not a fixed STL. SpeakCAD generates the greenhouse automatic vent opener bracket to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a greenhouse vent opener bracket, 60×30×5 mm, 8 mm slot 25 mm long for M6 bolts, two 6.5 mm holes 30 mm apart, ASA.
What a greenhouse automatic vent opener bracket is
A pair of brackets for fitting a wax-cylinder automatic roof vent opener to an aluminium greenhouse whose bracket holes do not line up. Each bracket is 60 × 30 × 5 mm with an 8 mm slot 25 mm long for M6 bolts into the frame channel and two 6.5 mm holes about 30 mm apart for the opener, adjustable by about 12 mm. Print on their sides in ASA; PLA softens behind glass.
Window openers for timber cold frames use a different arm and fixing. Open the brackets in SpeakCAD for free, change the hole spacing in the viewer or the chat, then download the STL.
People also search
greenhouse vent opener bracketautomatic vent opener mount stlgreenhouse window opener bracketgreenhouse vent bracket 3d print
Questions people ask about a greenhouse automatic vent opener bracket
A pair of brackets for fitting a wax-cylinder automatic roof vent opener to an aluminium greenhouse whose bracket holes do not line up. Each bracket is 60 × 30 × 5 mm with an 8 mm slot 25 mm long for M6 bolts into the frame channel and two 6.5 mm holes about 30 mm apart for the opener, adjustable by about 12 mm. Print on their sides in ASA; PLA softens behind glass.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a greenhouse vent opener bracket, 60×30×5 mm, 8 mm slot 25 mm long for M6 bolts, two 6.5 mm holes 30 mm apart, ASA.
Window openers for timber cold frames use a different arm and fixing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Garden hose nozzle holster for postSpray nozzles left on the lawn get run over by the mower; a holster on a fence post keeps one at hand next to the tap.Tent guy line tensioner for 3 mm reflective cordA three-hole line tensioner for the 2 to 3 mm reflective guy cord used on MSR, Big Agnes, Nemo and Decathlon Quechua tents, replacing the sliders that snap i…Brompton C Line front-carrier block coverA cover that keeps grit out of a C Line front-carrier block when the bag is off, 40 × 30 × 15 mm with a 2 mm snap.Jetboil Flash 2.0 pot-support ringA ring that lets a Flash 2.0 hold a non-Jetboil 1 L pot, 110 mm ID with three 8 mm tabs.Gardena hose end parking clip for 13 mm hoseA wall clip that parks the end of a 13 mm (1/2 inch) garden hose, which is about 19 mm outside, next to the tap.Trellis netting clip for 16 mm stakesA clip that holds climbing plant netting or pea mesh on 16 mm garden stakes.