1
Garden & outdoor
Wall bracket for a 30 m garden hose
This is not a fixed STL. SpeakCAD generates the wall bracket for a 30 m garden hose to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a garden hose wall hanger, 90 mm radius saddle 60 mm wide, 25 mm lip, backplate with three 5 mm countersunk holes, 20 mm spray gun hook.
What a wall bracket for a 30 m garden hose is
A wall hanger for up to 30 m of 13 mm garden hose. The curved saddle has a 90 mm radius so the hose does not kink, is 60 mm wide with a 25 mm front lip, and the backplate has three 5 mm countersunk holes on a 70 mm spacing. A small 20 mm hook underneath holds the spray gun. Print on its side in ASA or PETG with 6 walls.
19 mm hoses need a wider saddle for the same length. Open the model in SpeakCAD for free, change the saddle in the viewer or the chat, then download the STL.
People also search
garden hose hangerhose holder wall mount stlhose reel bracket 3d printgarden hose hook
Questions people ask about a wall bracket for a 30 m garden hose
A wall hanger for up to 30 m of 13 mm garden hose. The curved saddle has a 90 mm radius so the hose does not kink, is 60 mm wide with a 25 mm front lip, and the backplate has three 5 mm countersunk holes on a 70 mm spacing. A small 20 mm hook underneath holds the spray gun. Print on its side in ASA or PETG with 6 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a garden hose wall hanger, 90 mm radius saddle 60 mm wide, 25 mm lip, backplate with three 5 mm countersunk holes, 20 mm spray gun hook.
19 mm hoses need a wider saddle for the same length. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Jetboil fuel canister stabilizer stand for camping stoveA tripod foot that clips onto the base of a 100 g or 230 g isobutane canister so a Jetboil Flash, MiniMo or MSR PocketRocket does not tip on uneven ground.Rad Power RadRunner basket spacerA 20 mm spacer pair that lifts a RadRunner rear basket so a fat 4 inch tyre does not rub.Petzl Actik Core bike-helmet mountA mount that puts an Actik Core on a bike-helmet vent, 20 mm snap and the official 25 mm lamp plate.Wall clip for 16 mm drip irrigation pipeA wall and fence clip for 16 mm LDPE drip irrigation pipe.Greenhouse automatic vent opener bracketA pair of brackets for fitting a wax-cylinder automatic roof vent opener to an aluminium greenhouse whose bracket holes do not line up.Outdoor tap frost coverA frozen outside tap can split the pipe behind the wall, and a snug cover traps air around it through winter.