1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Festool Systainer3 SYS-MIDI bit insert
This is not a fixed STL. SpeakCAD generates the festool systainer3 sys-midi bit insert to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a festool systainer3 sys-midi bit insert is
An insert that holds 50 bits and a Centrotec chuck in a SYS-MIDI so they replace the foam. The plate is 380 × 270 × 18 mm with 7 mm rails. Print flat in PETG with 1.6 mm walls.
The M 187 oscillator insert is a smaller Systainer. In SpeakCAD you set bit count, preview the insert in the browser for free, then download the STL.
Example prompt
Create a SYS-MIDI bit insert 380×270×18 mm, 7 mm rails for 50 bits, 1.6 mm PETG.
People also search
systainer3 midi insert stlfestool sys-midi bit tray 3d printsystainer midi organizerfestool midi bit insert 3d model
Questions people ask about a festool systainer3 sys-midi bit insert
An insert that holds 50 bits and a Centrotec chuck in a SYS-MIDI so they replace the foam. The plate is 380 × 270 × 18 mm with 7 mm rails. Print flat in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a SYS-MIDI bit insert 380×270×18 mm, 7 mm rails for 50 bits, 1.6 mm PETG.
The M 187 oscillator insert is a smaller Systainer. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Milwaukee Packout Compact driver-bit caddyA caddy that drops into a Packout Compact Organizer and holds 30 impact bits on 7 mm rails so they do not rattle in the official foam.Bambu Lab H2D AMS HT spool restA rest that parks an AMS HT spool (about 200 mm) beside an H2D so a fifth material is not on the floor.Hex bit holder with magnet trayA compact holder keeps 1/4 inch hex screwdriver bits sorted by type and within reach on the bench.Tesla Model 3 Aero wheel hub cap removal toolA hooked lever that pops the 18 inch Aero wheel covers off a Tesla Model 3 without gouging the alloy underneath.Flashforge Adventurer 5M Pro filament guideA bowden guide that lifts filament off the Adventurer 5M Pro's top spool so it does not rub the lid.Utility-knife blade disposal tinA 70 × 40 × 20 mm tin with a 2 mm one-way slot that swallows snap-off and trapezoid blades and does not give them back.